Sony PDW-HD1550 Скачать руководство пользователя страница 96

Страница: 96 / 136

Setup Menu

Chapt

a) Not displayed when the unit is in 23.98P mode.

618

UPCONV EMBEDDED VITC

Select the source of the VITC embedded in the output HDSDI signal
when up-converting during playback of an SD clip.

VITC:

Select the VITC of the SD clip.

LTC:

Select the LTC of the SD clip.

619

VITC

Select whether to record the VITC generated by the internal timecode
generator during IMX recording.

off:

Do not record the internally generated VITC.

on:

Record the internally generated VITC.

Note

Even if this item is set to “off”, VITC is recorded if the input video signal
contains VITC and the VITC line is set to “throu” in menu item 723.

651

UMID SDI OUTPUT

Select whether to output UMID in the VANC of the SDI output.

off

: Do not output.

: Output.

See “Using UMID Data” (page 126) for more information about UMID.

652

UMID SD VANC LINE

Select the line in which UMID is output when menu item 651 is set to
“on”.

12H, 13H, 15H, 16H, 17H, 18H, 19H (59.94i/59.94P/29.97P mode)
9H, 10H, 12H, 13H, 14H, 15H, 16H, 17H, 18H (50i/50P/25P mode)

See “Using UMID Data” (page 126) for more information about UMID.

653

UMID HD VANC LINE

Select the line in which UMID is output when menu item 651 is set to
“on”.

9H to 17H to 20H (59.94i, 50i, 29.97P, 25P, 23.98P mode)
9H to 17H to 25H (59.94P, 50P mode)

See “Using UMID Data” (page 126) for more information about UMID.

657

ESSENCE MARK SDI OUTPUT

Select whether to output essence marks in the SDI output VANC.

off:

Do not output.

on:

Output.

660

ESSENCE MARK SD VANC LINE

Select the line to which to output essence marks when menu item 657 is
set to “on”.

12H, 13H, 15H, 16H, 17H, 18H, 19H (59.94i/59.94P/29.97P mode)
9H, 10H, 12H, 13H, 14H, 15H, 16H, 17H, 18H (50i/50P/25P mode)

665

ESSENCE MARK HD VANC LINE

Select the line to which to output essence marks when menu item 657 is

set to “on”.

9H to 17H to 20H (59.94i, 50i, 29.97P, 25P, 23.98P mode)
9H to 17H to 25H (59.94P, 50P mode)

666

METADATA ITEM OUT

Specify whether to include the information from recorded VANC packets
in data items in the DATA ITEM section of MXF files.

off:

Do not include VANC packet information in DATA ITEM.

on:

Include VANC packet information in DATA ITEM.

668

USER META DATA OUTPUT IN
MXF

Select whether to output user metadata to MXF files.

off:

Do not output.

on:

Output.

Menu items in the 600s, relating to the timecode and metadata

Item number

Item name

Settings

Содержание PDW-HD1550









































































































































Результаты поиска

Содержание PDW-HD1550

Отзывы:

Sony PDW-HD1550, Руководство по эксплуатации, Страница: 96 / 136

Результаты поиска

Содержание PDW-HD1550

Отзывы: