13
Front Panel
Cha
p
te
r 2
Name
s
an
d F
unc
tions
of
P
a
rt
s
c
Jog/shuttle transport indicators
These show the playback direction in jog, shuttle, or
variable mode.
d
Shuttle dial
Turn this dial for shuttle or variable playback.
e
Jog dial
Turn this dial for jog playback.
For details of playback operations in jog, shuttle, or
variable mode, see “Playback operation” (page 53).
For details of USB drive operations with the FOLDER
SEL and MEDIA SEL buttons, see “Handling External
Storage” (page 45).
5
Display/menu control section
a
Function buttons (F1 to F6)
These buttons are enabled when the function menu
is visible. Each press of a button changes the
setting of the corresponding item in the menu.
For convenience, this manual refers to these buttons as
buttons F1 to F6, in order from the top.
b
Display
Displays menus, audio level meters, and data, such as time
data or clip information. The DISPLAY button lets you
switch to the video monitor display.
For details, see “Display screen” (page 15).
c
PUSH SET knob
Use for setting menu items and for operations using
thumbnails on clip list screens. Turn the knob to select
items, and press it to confirm the selection. This button is
also used to set numerical values, such as timecodes.
See “Clip Operations” (page 66) for more information
about how to use the thumbnail screens.
d
MENU button
Displays the setup menu or the clip list screen menu. The
setup menu appears when no clip list screen is visible. The
same information is also superimposed on the display on a
monitor connected to the HDMI OUT connector of the
unit. Press once more to return to the original display.
See “Clip Operations” (page 66) for more information
about how to use the thumbnail screens.
e
RESET/RETURN button
Functions as the RESET button or the RETURN button.
RESET button:
Resets counters or the setting values of
the timecode generator. This button is also used to
abort or cancel setup menu and thumbnail search
operations.
RETURN button:
On setup menu and clip list screens,
returns to the previous procedure.
f
COPY button
Displays the Clip Copy screen
when pressed
while the clip list screen is shown on the display.
g
THUMBNAIL button
When this button is pressed when the basic operation
screen or video monitor screen is displayed, a list of clips
or EDLs saved on the currently selected media is
displayed. (That is, the current screen is switched to a clip
list screen.) When pressed again, returns to the basic
operation screen or the video monitor screen.
See “Clip Operations” (page 66) for more information
about how to use the thumbnail screens.
h
DISPLAY button
Each press of this button switches the display screen
between the basic operation screen and video monitor
screen
When the clip list screen is shown on the display, this
button switches the display screen between thumbnails
view and details view.
i
SHIFT button
Switches between functions for any button with two
functions.
1
Function buttons (F1 to F6)
2
Display
3
PUSH SET knob
4
MENU button
5
RESET/RETURN button
7
THUMBNAIL button
6
COPY button
8
DISPLAY button
9
SHIFT button
0
PAGE/HOME button