26
Clip Operations
Ch
apt
er 3 P
la
y
ba
c
k
an
d Clip O
p
e
rat
ions
• HD clips with OK marks cannot be deleted. If you want
to delete such clips, first delete the OK marks
.
• Locked MXF clips cannot be deleted. If you want to
delete such clips, first unlock the clips
.
1
In the thumbnail screen, select the thumbnail of the
clip to delete, and then select Delete Clip in the
THUMBNAIL menu.
The screen changes to the properties screen of that
clip, and a confirmation message appears beneath the
index picture.
2
Select “Execute”, and press the PUSH SET knob.
The clip is deleted.
In the thumbnail screen, the clips that followed the
deleted clip move up one position.
To batch delete groups of clips
You can batch delete groups of clips from recording
media.
• When both HD-mode and SD-mode clips exist on the
recording media, only clips in the currently selected
mode are deleted.
• In HD mode, clips with OK marks are not deleted, even
when a deletion is executed for a group of clips that
includes them.
1
In the thumbnail screen, select thethumbnails of the
clips to delete, and then select Delete All Clips in the
THUMBNAIL menu.
The confirmation message “Delete All Clips?”
appears.
2
Select “Execute”, and press the PUSH SET knob.
The deletion starts.
During the deletion, the progress of the deletion is
displayed.
If you executed the deletion in HD mode, only HD-
mode clips are deleted.
If you executed the deletion in SD mode, only SD-
mode clips are deleted.
To cancel the deletion
Press the RETURN button.
When the deletion finishes
A completion message appears, and the
THUMBNAIL menu screen appears again.
Dividing clips
In the expand thumbnail screen
and the
essence mark thumbnail screen
, HD-mode
clips can be divided into two clips at the selected frame.
1
Select the thumbnail of the frame where you want to
divide the clip, and then select Divide Clip in the
THUMBNAIL menu.
The properties screen of the selected frame appears,
and a confirmation message appears below the image.
2
Select “Execute”, and press the PUSH SET knob.
The clip is divided at the selected frame, and two clips
with different names are created.
The first four characters of the clip name are taken from
the name of the original clips, and the last four characters
are new serial numbers.
Example:
When the name of a newly recorded clip would
be EFGH0100, and a clip named ABCD0002 is
divided, the names of the two newly created clips are
ABCD0100 and ABCD0101.
When there is not enough remaining capacity on the
recording media to store the divided clips, a message
appears to inform you that there is not enough capacity.
Expand thumbnail screen
Like the clip thumbnail screen, the expand thumbnail
screen allows you to search inside clips by using
thumbnails, to change index pictures, and to add and delete
shot marks.
Expand thumbnail screen in HD mode
In HD mode, the selected clip is divided into 12 equally-
sized blocks, and a thumbnail of the first frame in each
block is displayed.
Notes
Notes
FAT-HD
Note
