1-6 (E)
PDBK-MK1
1-4. Settings after Installation
Check procedure
1. While press the
[HOME]
button and the
[SHIFT]
button simultaneously, press the
[MENU]
button.
The MAINTENANCE MENU is displayed.
MAINTENANCE MENU
M0:CHECK
M1:ADJUST
M2:SERVICE SUPPORT
M3:OTHERS
M4:SETUP MAINTENANCE
M5:NETWORK
M6:DRIVE
2. Rotate the
[PUSH|SET]
knob to select M2: SERVICE
SUPPORT, and press the
[PUSH|SET]
knob.
3. Rotate the
[PUSH|SET]
knob to select M22: OPTION
STATUS, and press the
[PUSH|SET]
knob.
4. Confirm that “ena” is displayed in the place corre
-
sponding to PDBK-MK1.
OPTION STATUS
MPEG TS Board : ena
PDBK-MK1 : ena
TO MENU : MENU KEY
n
For more detailed information on the Maintenance Mode,
refer to the PDW-HR1 Operation Manual or the Mainte-
nance Manual Volume 1.