DISASSEMBLY
DISASSEMBLY
– 21 –
qj
CNX-217 BOARD, INVERTER UNIT, RAY-CATCHER UNIT
6
2
Coating clip
5
6
6
3
4
Removal procedure
Attach the two UL tapes (
8
)
to secure the harness and
the flexible flat cable (LED)
as shown in the right picture.
UL tape
4
Coating clip
1
4
CNX-217
board
Inverter
shield (W700G)
3
Ray-catcher unit
7
Inverter unit
8
2
2
6
6
5
5
1
Open wide the Coating clip,
and disconnect the harness.
3
Disconnect the harness.
2
Disconnect the three
connectors.
4
Remove the
two screws,
and remove
the CNX-217
board.
+PS (3 X 6)
7-682-647-01
Gold
6
Disconnect the four
connectors.
5
Remove the
two screws,
and remove
the Inverter
shield
(*1)
.
+PS (3 X 6)
7-682-647-01
Gold
7
Remove the
two screws,
and remove
the inverter
unit.
8
Peel off the two UL tapes.
9
Remove the screw, and
remove the
Ground plate
(Upper) and
Ray-catcher
unit.
+PS (3 X 6)
7-682-647-01
Gold
+PS (3 X 6)
7-682-647-01
Gold
9
Ground plate
(Upper)
(*1) W700G Model only
17
