background image

57

Chapter 5
CMOS Setup Options

This chapter describes each screen in the Award BIOS Setup Utility (see 

“Accessing the BIOS Setup Utility” 

on page 18).

The Award BIOS setup has five menu items on the menu bar. These are:

Main

Advanced

Power

Boot

Exit

Options that you can change are enclosed in brackets. Text that is not 
enclosed in brackets cannot be changed. 

A small triangle ( ) indicates that there is a sub-menu with additional 
information and options. Press Enter to display the sub-menu. The 
information and options in a sub-menu are context-sensitive (they appear 
or disappear, depending on which options you select).

The item shown in [brackets] in this guide is the default option. The 
option shown in [brackets] on the screen is the option currently set for 
your system. 

The other available options for each item are shown without brackets 
directly below the default option in this guide. The available options are 
listed in the order they occur when you press the + key.

Use the left and right arrow keys to choose a menu item. Use the up and 
down arrow keys to select an option. Press Enter to display a list of 
options, or press the + or - key to cycle through the other options. 

If you display the list of options, use the up and down arrow keys to 
select an option in the list, then press Enter to choose the selection. 

Press Esc to go back to the main menu. 

Содержание PCV-RX791



































































































Отзывы: