manualshive.com logo in svg

Sony PCV-RX770 Computer User Guide (primary manual), Справочное руководство системы, Страница: 90 / 96

Поделиться
Скачать
Sony PCV-RX770 Computer User Guide (primary manual) Скачать руководство пользователя страница 90

VAIO Digital Studio System Reference Manual

76

I/O and Expansion Slots  

Floppy Disk Drive and Controller 

 

Hard Drives and Controllers 

 

Optical Drives 

Serial port

One high-speed NS16C550-compatible port

Parallel port

One high-speed bi-directional 
Centronics-compatible port with ECP and 
EPP modes

Modem jacks

Two RJ-11 jacks (telephone and line) 

USB ports

*

* Universal Serial Port (USB) technology only supports version 1.1.

USB1 and USB2 (front panel) 
USB3 and USB4 (rear panel)
(See online specifications sheet for details.)

PCI slots

Not all PCI slots are available for expansion. 
See online specifications sheet for details.

CNR slot

One slot for a CNR modem.

IDE headers

Primary and secondary (each supports two 
IDE drives)

Drive

Description

Floppy disk controller 

82077-compatible (supports up to 2.88 MB)

Floppy disk drive

3.5-inch, 1.44 MB

Drive

Description

IDE hard drive

See online specifications sheet for details.

EIDE controller

Supports up to four EIDE drives (supports 
PIO Mode 4 EIDE drives and Ultra DMA/100 
Mode drives)

Drive

Description

Optical drive #1

See online specifications sheet for details.

Optical drive #2

See online specifications sheet for details.

Содержание PCV-RX770 Computer User Guide (primary manual)

































































































Отзывы:

Нет отзывов