Sony PCV-RX360DS - Vaio Digital Studio Desktop Computer, Руководство по обслуживанию

Страница: 75 / 86

6-2 PCV-RX360DS/RX370DS/RX380DS (UC)
Confidential
AUX IN (not installed*)
4 pin standard 2mm single line header for AUX Audio signal input
Connector location on MB See the frame harness diagram
Pin assignments:
Pin Signal Name
1 Left Line In
2 Ground
3 Ground
4 Right Line In
Video (not installed*)
4 pin standard 2mm single line header for Video Audio signal input
Connector location on MB See the frame harness diagram
Pin assignments:
Pin Signal Name
1 Video_L
2 Ground
3 Ground
4 Video_R
3 pin standard 2mm single line header for S/P DIFoutput
Connector location on MB See the frame harness diagram
Pin assignments:
Pin Signal Name
1 VCC
2 AU_DATA(GPIO[2])
3 Ground
IEEE1394 header x2
8 pin standard 2.5 mm single line header for IEEE1394 Front connector.
IEEE1394 Front access header
Connector location on MB Refered as 1394HEAD3
See the frame harness diagram
IEEE1394 Optional header (not installed*)
Connector location on MB Refered as 1394HEAD2
See the frame harness diagram
Pin assignments:
Pin Signal Name
1 Shell Ground
2 Ground
3 TPA
4 TPA*
5 TPB
6 TPB*
7 Ground
8 VP ( Power )
VP line need over current protector. Raychem SMD150/33-2 or equivalent is
used for that.
USB FRONT
12 pin standard 2.5mm Dual line Box header for Front USB connector.
Connector location on MB See the frame harness diagram
Pin assignments:
Pin Signal Name Pin Signal Name
1 +3V_Dual 2 NP1#
3 NP3# 4 NC ( Key )
5 USB VCC1 6 USB VCC2
7 LP2+ 8 LP3+
9 LP2- 10 LP3-
11 Ground 12 Ground
USBVCC2 line needs the over current protector.
Raychem miniSMDC110-2 or equivalent is used for that.
SPDIFOUT (not installed*)
FRONT PANEL I/O
20 pin standard 2.5mm dual line header for LED/Switch unit
Connector location on MB See the frame harness diagram
Pin assignments:
Pin Signal Name Pin Signal Name
1 PWR_BTN 11
2 PWR_BTN_G 12 MSG_LED-
3 IDELED- 13 KEYLOCK
4 14 KEYLOCK_G
5 KEY 15 SMI
6 P 16 SMI_G
7 PWR_LED- 17 +5V
8 P 18 HD_LED2-
9 RESET 19 Ground
10 RESET G (GND) 20 SPKR
Battery Holder & Battery
Holder vender LOTES B6615BP5L or equivalent
Holder location on MB See the frame harness diagram
Battery vender Sony CR2032 or equivalent
SOFA header
This SOFA header is not same one Callisto has.
Pin assignments:
Pin Signal Name Pin Signal Name
1 PWRBTN# 2 GND
3 SYS_ON 4 GND
5 TXD2 6 GND
7 RXD2 8 GND
9 CTS# 10 GND
11 RTS# 12 GND
13 +5VSB 14 +5VSB
15 +5VSB 16 +5V
17 +5V 18 +5V
19 NC 20 +12V
(Note) PWRBTN#: control M/B power on/off.
SYS_ON: control M/B reset signal and secondary IDE reset signal.
TxD2, RxD2, and CTS2: shared with COM2 Optional header
1-2 External connector
Parallel
Connector location on MB Rear side, see the frame harness diagram
Pin assignments:
Pin Signal Name Pin Signal Name
1 Strobe# 14 Auto Feed#
2 Data bit 0 15 Fault#
3 Data bit 1 16 INIT#
4 Data bit 2 17 SLCT IN#
5 Data bit 3 18 Ground
6 Data bit 4 19 Ground
7 Data bit 5 20 Ground
8 Data bit 6 21 Ground
9 Data bit 7 22 Ground
10 ACK# 23 Ground
11 Busy 24 Ground
12 Error 25 Ground
13 Select
(not installed*)
* Connectors mentioned (not installed) are not used even they are mounted on MB