S
o
ft
wa
re
Guide
Using Video software
30
Creating an Assemble List
You can create an
Assemble List
with files you want to splice together. Afterwards you can always edit the
Assemble List by changing the order of the files and adding or deleting files.
To add files to an Assemble List, proceed as follows:
1
Make sure you have installed DVgate from the application CD, if applicable (see the printed
Specifications
sheet
and
Application CD Guide
).
2
Launch
DVgate Assemble
.
3
Click the
Add
button.
The
Add
dialog box appears.
4
Choose
AVI file
in the
Files of type
drop-down box.
If you select
Add all divided files saved with the same name
,
DVgate Assemble will add all serial numbered files with the same name
to the list. Serial numbered files are files that are created when DVgate
Motion saves files that are split and applies consecutive numbers to
them. The numbers of the split files have 4 digits and increase one unit
at a time starting with 0001.
5
Select a file and click
Open
.
The AVI file is added to the list.
✍
Imported files are added at the end of the Assemble List.
You can only add video files in AVI (DV CODEC) format, and still image files in BMP, JPEG, and GIF formats. Please see the help files for information
on converting non-compatible AVI files.
When you add a still image file (BMP, JPEG, or GIF), the number of frames, converted size, and size conversion mode are shown.
You can save an Assemble List for future use. Assemble List files can only be used in DVgate Assemble.
