Sony PCV-R556DS - Vaio Digital Studio Desktop Computer, Справочное руководство

Страница: 46 / 118

VAIO Digital Studio Reference Manual
32
8
If necessary, remove any add-in cards (see “Removing an Add-in
Card” on page 29) to gain access to the battery. You may also need to
disconnect some cables.
9
Use a small flathead screwdriver or your finger to push out against
the small tab at one end of the battery holder to pop out the battery.
10
Gently lift out the battery and dispose of it according to the
instructions that came with the new battery.
11
Insert the new battery into the battery holder, with the plus (+) side
up.
12
Replace any add-in cards that were removed.
13
Reconnect any cables that were disconnected.
14
Replace the cover (see “Replacing the Cover” on page 26).
15
Reconnect the power cord and turn on the computer.
!
Touch any exposed metal part of chassis to discharge static electricity in
your body before handling an add-in card or other sensitive electronic
component.
✍
The Sony CR2032 battery is recommended. Using a type of battery other than a
CR2032 may present a risk of fire or explosion.
KY0072.VSD
Push in here to
pop out battery