background image

Avoid using the modem during an 
electrical storm. 

Do not use the modem or a telephone 
to report a gas leak in the vicinity of 
the leak.

A socket outlet should be as close as 
possible to the unit and easily 
accessible.

Pour prévenir tout risque d’incendie 
ou d’électrocution, garder cet appareil 
à l’abri de la pluie et de l’humidité.

Pour prévenir tout risque 
d’électrocution, ne pas ouvrir le boîtier. 
Confier l’entretien de cet appareil 
exclusivement à un personnel qualifié.

L’appareil doit être le plus près 
possible d’une prise murale pour en 
faciliter l’accès.

Regulatory Information

This equipment has been tested and found 
to comply with the limits for a Class B 
digital device, pursuant to Part 15 of the 
FCC Rules. These limits are designed to 
provide reasonable protection against 
harmful interference in a residential 
installation. This equipment generates, 
uses, and can radiate radio frequency 
energy and, if not installed and used in 
accordance with the instructions, may 
cause harmful interference to radio 
communications.

However, there is no guarantee that 
interference will not occur in a particular 
installation. If this equipment does cause 
harmful interference to radio or television 
reception, which can be determined by 
turning the equipment off and on, the user 
is encouraged to try to correct the 
interference by one or more of the 
following measures:

Reorient or relocate the receiving 
antenna.

Increase the separation between the 
equipment and the receiver.

Connect the equipment into an outlet 
on a circuit different from that to 
which the receiver is connected.

Consult the dealer or an experienced 
radio/TV technician for help. 

You are cautioned that any changes or 
modifications not expressly approved in 
this manual could void your authority to 
operate this equipment. 

Only peripherals (computer input/output 
devices, terminals, printers, etc.) that 
comply with FCC Class B limits may be 
attached to this computer product. 
Operation with non-compliant peripherals 
is likely to result in interference to radio 
and television reception.

All cables used to connect peripherals must 
be shielded and grounded. Operation with 
cables, connected to peripherals, that are 
not shielded and grounded, may result in 
interference to radio and television 
reception.

AVERTISSEMENT

Declaration of Conformity

Trade Name: SONY

Model No: PCG-Z505S/PCG-
Z505SX

Responsible Party:

Sony Electronics Inc.

Address:

1 Sony Drive
Park Ridge, NJ 07656

Telephone No.: 201-930-6970

This device complies with Part 15 of 
the FCC rules. Operation is subject 
to the following two conditions: (1) 
This device may not cause harmful 
interference, and (2) this device 
must accept any interference 
received, including interference 
that may cause undesired 
operation.

Содержание PCG-Z505SX




































































































Отзывы: