PCG-FRV Series CD/DVD Drive
Replacement Instructions
P/N T99860134
Rev. C
2/2
Step 6
.
Rotate the PC. The CD/DVD drive should be
facing you. Ensure that all three (3) screws from step 5
have been removed. Firmly grasp the CD/DVD drive and
slide it away from the computer as shown above.
Step 7
.
Slide the new CD/DVD drive into the bay using firm
even pressure as shown above. When properly inserted, the
drive's edge is evenly aligned with the edge of the computer
and the screw holes should be aligned with the screw
openings.
Step 4
.
Using the enclosed magnetic screwdriver,
remove the marked screw and door as shown and set
them aside.
Step 8
.
Using the enclosed
magnetic screwdriver, reinstall
the three (3) previously
removed screws.
CAUTION!
Be careful not
to drop screws into the inside
of the unit, and to use the
correct screws, as shown in
the picture. Do not over tighten
the screws!
Step 9
.
Using the
enclosed magnetic
screwdriver, reinstall
the external door and
screw. Return the old
CD/DVD drive to Sony
following the included
shipping instructions.
Step 5
.
Using the enclosed magnetic screwdriver,
remove the three (3) screws as indicated in the picture.
CAUTION!
Be careful not to drop screws into the unit
Faceplate should be flat
with edge of PC
