Sony PBD-D50, Руководство по эксплуатации

Страница: 19 / 100

19
Using as a DVD-ROM drive
Using with MS-DOS
The DOS prompt of Windows 95 can read this unit,
but you cannot use this unit with MS-DOS as the
DVD-ROM drive. (However, you can use MS-DOS for
the CD-ROM drive.)
When using a unit with MS-DOS or reinstalling
Windows 95 from this unit, you need to install the
driver separately. To install the CD-ROM drive
software, PCMCIA Release2.1 or higher is required.
Make sure your PC is installed with either Card
Service or Socket Service before installing the driver
into MS-DOS. Refer to the instructions of your PC for
more details.
1
Before inserting the SCSI PC card into your PC,
press POWER on this unit to turn the power on.
Remove the disc, if inserted into the drive.
2
After checking that the SCSI PC card is connected
to this unit correctly, insert the SCSI PC card into
the PC card slot of your PC.
3
Insert the supplied install disk into the floppy disk
drive of your PC.
4
Enter keys as below on the DOS command line to
change the DOS directory to the floppy drive.
a: ÷
5
Enter keys as below on the DOS command line.
cd dos ÷
dosinst ÷
6
Follow the instructions on the screen to continue
installation.
7
When installation finishes, restart your PC.
When using the PC installed with IBM Card
Service or Socket Service
Refer to “Readme.txt” of the supplied floppy disk.
Note
Make sure to restart
your PC after installing.
If not, this unit may not
work as the DVD-ROM
drive.