GB
Summer Time
You can change this setting without
stopping the clock.
Off
Does not set the summertime.
On
Sets the summertime. The clock is set to
move the time forward 1 hour.
Date & Time
See page 19.
Area Setting
You can adjust time difference without
stopping the clock. Select your local area
when using the camcorder in other time
zones. Refer to the world time difference
information on page 102.
Auto Clock ADJ
The camcorder can maintain accurate
time automatically by acquiring time
information from the GPS system.
On
Maintains accurate time automatically.
Off
Does not maintain accurate time using the
GPS system.
Notes
You must set the date and time on your
camcorder before use (p. 19).
There may be discrepancies of a few seconds
even if [Auto Clock ADJ ] is activated.
This function automatically adjusts the clock
when the camcorder receives GPS signals and
finishes triangulating successfully while the
power is on. Once the clock is adjusted, it will
not be adjusted until the next time you turn the
camcorder on again.
The clock may not be adjusted to the correct
time automatically using the GPS system,
depending on the country/region selected for
your camcorder. In this case, set [Auto Clock
ADJ ] to [Off].
Auto Area ADJ
The camcorder can compensate for time
differences automatically by acquiring
location information from the GPS system.
On
Compensates for time differences
automatically.
Off
Does not compensate for time differences
automatically.
Notes
You must set the date and time on your
camcorder before use (p. 19).
The camcorder may not compensate for the
time difference automatically, depending on the
country/region selected for your camcorder. In
this case, set [Auto Area ADJ] to [Off].
