4
NSX-24GT1/32GT1/40GT1/46GT1
NSX-24GT1/32GT1/40GT1/46GT1
HANDLING THE GLASS ASSEMBLY
Use the following precautionary guidelines when replacing the Glass Assembly to avoid material degradation or screen coating
degradation, and ensure that dust, dirt, or
fi
ngerprints are not left between the glass and the LCD panel.
Replace the Glass Assembly in a brightly lit and clean room.
Place the replacement Glass Assembly on a dark cloth to make it easier to see dust
and dirt particles.
Wear anti static gloves to avoid leaving
fi
nger prints on the glass.
Use a dry, soft MicroFiber cloth, such as a lint free polishing cloth, to gently wipe the
glass to remove any dust or dirt particles.
If the glass needs additional cleaning, slightly moisten the cloth with a diluted mild
soap or mild detergent solution, or use a compressed air duster (spray can type).
After replacing the Glass Assembly, verify there are no dark spots or
fi
nger prints
visible on the screen.
CAUTION
Do Not
use paper towels, any type of abrasive pad, rags, rubber or vinyl materials to
clean the screen. Using these materials could easily scratch the screen which may
result in permanent damage.
Do Not
se any cleaning product containing alkaline/acid cleaner, scouring powder, or
volatile solvent, such as alcohol, ammonia, benzene, thinner or insecticide. Using any
of these harsh cleaners may result in permanent damage to the screen.
Do Not
spray water or detergent directly onto the TV screen . If liquid drips into the
bottom of the screen it may cause a failure.
