Sony Network Walkman NW-HD3, Руководство по обслуживанию

Страница: 16 / 54

16
NW-HD3
5-3-8. Hard disk drive format
This mode is used when performing the format of hard disk drive.
Checking method:
1. Enter the test mode.
2. Press the
,
key to display major item, and press the
M m
key to select the “OTHERS”.
3. Press the
,
key to display minor item, and press the
M m
key to select the “FORMAT”.
4. Press the
Bx
key, “START” is displayed and format of hard
disk drive is performed. After performing format, “OK” or “NG”
is displayed automatically.
5. Press the
[MENU]
key, return to minor item selection screen.
5-3-9. Hard disk drive sector read
Sector of hard disk drive is read.
Checking method:
1. Enter the test mode.
2. Press the
,
key to display major item, and press the
M m
key to select the “OTHERS”.
3. Press the
,
key to display minor item, and press the
M m
key to select the “SC RD1” or “SC RD2” or “SC RDF”.
4. Press the
Bx
key, “READY?” is displayed .
5. Press the
Bx
key, “READ” is displayed and first 1/3 sector
(SC RD1) or last 2/3 sector (SC RD2) or all sector (SC RDF)
of hard disk drive is read. This operation takes about 50 minutes
(SC RD1) or 100 minutes (SC RD2) or 150 minutes (SC RDF).
Then the number of error sector is displayed automatically.
6. Press the
[MENU]
key, return to minor item selection screen.
OTHERS
LCD display
FORMAT
LCD display
START
LCD display
OK
r
LCD display
OTHERS
5-3-10. Contrast setting
Contrast table setting value switch is performed.
Checking method:
1. Enter the test mode.
2. Press the
,
key to display major item, and press the
M m
key to select the “OTHERS”.
3. Press the
,
key to display minor item, and press the
M m
key to select the “CNTRST”.
4. Press the
Bx
key, contrast table setting value is displayed.
In this state, each time
[MODE]
key is pressed, contrast table
setting value (–3 to +3) switch is performed.
5. When
Bx
key is pressed setting is reflected.
When
[MODE]
key is pressed, setting is not reflected.
In both cases, return to minor item selection screen.
5-3-11. Destination setting
Setting the destination.
Checking method:
1. Enter the test mode.
2. Press the
,
key to display major item, and press the
M m
key to select the “OTHERS”.
3. Press the
,
key to display minor item, and press the
M m
key to select the “DEST”.
4. Press the
Bx
key. Press the
[MODE]
key, destination (JP/US/
EU/GA*) is selected.
Press the
Bx
key, destination is entered.
Press the
[MENU]
key when canceling.
Destination Default Sound pressure
language regulation
JP Japanese OFF
US English OFF
EU English ON
GA* English OFF
* Destination of GA can be chosen only when IC1102 is mounted
on the MAIN board and font data is contained in the IC1102
(IC1102 is mounted only E, Hong Kong, Taiwan, Korean,
Chinese and Tourist models).
LCD display
SC RD1
LCD display
READY?
LCD display
r
****** : number of error sector
READ
******
OTHERS
LCD display
CNTRST
LCD display
+0
LCD display
OTHERS
LCD display
DEST
LCD display
Ver. 1.3