40
GB
Tip
Do the following procedure to specify the fade-in or
fade-out duration for playback or recording.
1 While the deck is stopped or playing, or
paused, press MENU/NO.
2 Turn AMS (or press
./>
repeatedly)
until “Setup?” appears, then press AMS or
YES.
3 Turn AMS (or press
./>
repeatedly)
to select the setting, then press AMS or
YES.
4 Turn AMS (or press
./>
repeatedly)
to select the duration, then press AMS or
YES.
Both the Fade-in and Fade-out durations can be
set in 0.1 second steps.
5 Press MENU/NO.
You can set the deck so that it turns off
automatically after a specified duration.
1
While the deck is stopped or playing,
press MENU/NO.
2
Turn AMS (or press
./>
repeatedly) until “Setup?” appears,
then press AMS or YES.
3
Turn AMS (or press
./>
repeatedly) until “Sleep Off” appears in
the display, then press AMS or YES.
4
Turn AMS (or press
./>
repeatedly) to select the setting, then
press AMS or YES.
5
Turn AMS (or press
./>
repeatedly) until “Sleep 60min” appears
in the display, then press AMS or YES.
6
Turn AMS (or press
./>
repeatedly) to select the time to be
turned off (“30min,” “60min” (factory
setting), “90min,” or “120min”), then
press AMS or YES.
7
Press MENU/NO.
Tip
You can check the remaining time until the power
turns off.
1 With the Sleep Timer turned on, perform
steps 1 and 2 of the above procedure.
2 Turn AMS (or press
./>
repeatedly)
until “Sleep **min” appears.
Note
When you turn on the Net MD function, the Sleep
Timer is automatically set to “Sleep Off.”
To change the
duration of
Select
Fade-in Play/Recording
F.in
Fade-out Play/Recording
F.out
Falling asleep to music
— Sleep Timer
To
Select
Turn on Sleep Timer
Sleep On
Turn off Sleep Timer Sleep Off (factory setting)
