Sony MZ-B10 - Minidisc Voice Recorder, Руководство по обслуживанию

Страница: 31 / 64

31
MZ-B10
8. Press the
[SPEED C]
key to set the address value
to the next address for adjustment.
• Keys available when the cursor is on the address value
[DISPLAY]
key on the remote commander: address value + 1000(h)
[P MODE]
key on the remote commander: address value + 0100(h)
[SOUND]
key on the remote commander: address value - 0100(h)
key on the remote commander: address value + 0010(h)
[SPEED C]
key: adjusted value + 0001(h)
[SPEED CONTROL -]
key: adjusted value - 0001(h)
x
key: moving the cursor to the adjusted value
9. Press the x key to move the cursor to the adjusted value.
10. While referring to the patch data list repeat the data correction
write procedure from step 6 to 9 until the address 2B98 is com-
pleted (until writing the last value at step 7).
11. Press the
[TRACK MARK]
key or press the
[DISPLAY]
key
of the remote commander for several seconds to exit the RAM
monitor.
adjusted value
(blinking : cursor)
2A15**
023
Set LCD display
address value
adjusted value
(blinking : cursor)
2A15**
023
Set LCD display
address value
adjusted value
2B9800
023
Set LCD display (writing is complete to the address 2B98)
address value
(blinking : cursor)
Patch 01
023
Set LCD display
***SCC
023
***SDD
023
Set LCD display
Writing complete
12. Press the
X
key or press the key on the remote com-
mander to write all patch data to the nonvolatile memory.
13. Turn off the power.