Sony MVS-8000X SystemMVS-7000X System, Руководство пользователя

Страница: 506 / 706

USO
RESTRITO
506
Macro Operations in the Standard Type Flexi Pad Control Block
Ch
a
p
te
r 16
M
a
c
ro
s
Press to set a pause length.
TAKE button
Status display
(Number of events executed/
total number of events)
2
Press the [TAKE] button.
This executes one event within the macro, then stops.
The number of events executed, as shown in the
memory recall section status display, is incremented
by one.
3
Repeat step 2 , executing the macro event by event.
When all events in the macro have been executed, the
[TAKE] button goes off.
Creating and Saving a Macro
1
In the Flexi Pad control block, press the [MCRO]
button, turning it on.
This assigns the Flexi Pad control block to macro
operations.
2
Select the bank of the register in which you want to
save the macro.
For details of the method of operation, see step 2 in the
previous item “Recalling a Macro Register and
Executing a Macro” (page 505).
3
Hold down the [MCRO] button in the Flexi Pad
control block, and press the button in the memory
recall section showing the desired register name.
This assigns the Flexi Pad control block to macro
editing, and the auto insert function is enabled. The
[MCRO] button lights red.
“xxx” is the number of the
currently recalled register.
Pressing this button saves
the macro, and the Flexi
Pad section switches back
from macro editing mode to
the recall operation mode.
4
In the same way as in the numeric keypad control
block, create the events you want to save in the macro.
For details, see step
2
(page 500) of “Creating a new
macro.”
5
Repeat step 4 to save the desired events in the macro.
The operations you carry out on the control panel are
saved as a sequence of events in the macro.
The numeric display appears as follows.
Example:
Total number of events
Position of last saved event
6
Press the [STOR xxx] button in the memory recall
section (where xxx is the register number).
The [STORE STATS] button lights amber.
This saves the created macro in the register, and macro
editing ends.
The Flexi Pad control block returns to the state before
macro editing began.
The [MCRO] button lights amber.
Notes
•
During macro editing, you can press a mode selection
button in the Flexi Pad control block other than the
[MCRO] button (for example, the [WIPE] button or
[DME] button) to record the executed operation as an
event. In this case, the [MCRO] button remains lit red.
•
During macro editing, if you press a button for which a
macro attachment is set, the macro within the register
assigned to the button is merged into the macro being
edited. However, the macro assigned to the button is not
executed.
•
While carrying out macro editing in the Flexi Pad control
block, absolutely no macro operations are possible in the
Flexi Pad control blocks for other M/E and PGM/PST
banks. Macro operations from the numeric keypad
control block or Multifunction Flexi Pad control block
are also not possible.