Sony MVS-8000X SystemMVS-7000X System, Руководство пользователя

Страница: 305 / 706

USO
RESTRITO
Applying Special Effects (Effects on the Overall Video Signal)
305
Knob Parameter Adjustment Setting values
2 V Vertical
defocusing of
video and
key signals 0.00 to 100.00
3 All Horizontal
and vertical
defocusing of
video and
key signals H value shown
Knob Parameter Adjustment Setting values
1 H Horizontal
defocusing of
key signal 0.00 to 100.00
2 V Vertical
defocusing of
key signal 0.00 to 100.00
3 All Horizontal
and vertical
defocusing of
key signal H value shown
Knob Parameter Adjustment Settings values
1 V/K H Horizontal
defocusing of
video and
key signals
Video H value
shown
2 V/K V Vertical
defocusing of
video and
key signals Video V value
shown
3 V/K All Horizontal
and vertical
defocusing of
video and
key signals Video H value
shown
4 Video All Horizontal
and vertical
defocusing of
video signal Video H value
shown
5 Key All Horizontal
and vertical
defocusing of
key signal Key H value shown
Knob Parameter Adjustment Settings values
1 Video H Horizontal
defocusing of
video signal 0.00 to 100.00
2 Video V Vertical
defocusing of
video signal 0.00 to 100.00
3 Key H Horizontal
defocusing of
key signal 0.00 to 100.00
4 Key V Vertical
defocusing of
key signal 0.00 to 100.00
Knob Parameter Adjustment Setting values
1 Center X X-value of
shrinking
center point
–4.00 to +4.00 (SD)
–12.00 to +12.00
(HD)
2 Center Y Y-value of
shrinking
center point
–3.00 to +3.00 (SD)
–9.00 to +9.00 (HD)
3 Size Shrinking
ratio 0.00 to 100.00
Ch
a
p
te
r 11
DM
E
O
p
e
ra
ti
o
n
s
Knob Parameter Adjustment Settings values
2 V Vertical
defocusing of
video signal 0.00 to 100.00
3 All Horizontal
and vertical
defocusing of
video signal H value shown
When Video/Key is selected (with SDI-interfaced
DME)
When Key is selected (with SDI-interfaced DME)
Parameter group [1/2]
Masking the Blur effect with a selected
pattern
Press [Mask] to display the Mask menu, and set the pattern
type and modifiers
(see page 310) .
Multi Move Settings
Parameter group [2/2]
Applying the Multi Move effect
1
In the DME menu, select VF2 ‘Video Modify’ and
HF2 ‘Multi Move.’
The Multi Move menu appears.
2
Press [Multi Move], turning it on.
3
Set the parameters.
The valid ranges of the parameter values depend on the
combination of signal format (SD/HD) and aspect
ratio (4:3/16:9) selected in the system, as follows.
4:3 mode
When video is selected (with SDI-interfaced DME)
Knob Parameter Adjustment Settings values
1 H Horizontal
defocusing of
video signal 0.00 to 100.00