manualshive.com logo in svg

Sony MSW-900, Руководство по эксплуатации

Поделиться
Скачать
Sony MSW-900 Скачать руководство пользователя страница 208

4

Chapter 4  Adjustments and Settings for Recording

4-82

3

Turn the MENU knob to move the 

t

 mark to the item you want to

set, and push MENU knob.

The 

t

 mark to the left of the selected item changes to the 

z

 mark

and the 

z

 mark to the left of the setting changes to the ? mark.

4

Turn the MENU knob to select whether or not to record the selected
item superimposed on the picture, and push the MENU knob.

The 

z

 mark to the left of the selected item changes to the 

t

 mark

and the ? mark to the left of the setting changes to the 

z

 mark.

5

To continue setting other items, repeat steps 3 and 4.

6

To end menu operations, set the MENU ON/OFF switch to OFF.

To carry out superimposed recording

To actually record the items selected for superimposed recording in the
SHOT DISP page, set the OUTPUT/DCC switch to BARS, DCC OFF.
The items selected for superimposed recording appear in the viewfinder
screen and are recorded superimposed on the picture.

Содержание MSW-900





































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды