Sony MPC-3626, Руководство по эксплуатации

Страница: 70 / 153

3. Camera Operations: Shooting Menu
70
Shooting > LUT Select
Makes settings related to the LUT to apply to the output image.
[Note]
The value of each menu item (excluding SDR Gain) varies depending on the Technical > Special Configuration > RM/
RCP Paint Control (page 91) setting in the full menu.
Menu item Setting Description
HDMI When RM/RCP Paint Control is
set to Off (4K/QFHD output):
Log/ Look
Display only, because the HDMI output image
setting is the same as SDI 1/2.
When RM/RCP Paint Control is
set to Off (2K/HD output):
Log/ s709 /R709(800%)/
Look
Display only, because the HDMI output image
setting is the same as Monitor.
[Note]
Set to Log (fixed) when Technical > Special
Configuration > SD HDMI (page 91) is set to On in
the full menu.
When RM/RCP Paint Control is
set to On (4K/QFHD output):
Log /HLG(Natural)/
HLG(Live)/User Gamma
Display only, because the HDMI output image
setting is the same as SDI 1/2.
When RM/RCP Paint Control is
set to On (2K/HD output):
Log /HLG(Natural)/
HLG(Live)/User Gamma/
R709(800%)/R709-Like
Display only, because the HDMI output image
setting is the same as Monitor.
Shooting > LUT Select
Makes settings related to the LUT to apply to the output image.
[Note]
The value of each menu item (excluding SDR Gain) varies depending on the Technical > Special Configuration > RM/
RCP Paint Control (page 91) setting in the full menu.
Menu item Setting Description
VF LUT When RM/RCP Paint Control is
set to Off:
Log/ s709 /R709(800%)/
Look
Selects the LUT to apply to the viewfinder/
monitor screen output image.
When RM/RCP Paint Control is
set to On:
The settings change as
follows depending on the
Project > Basic Setting >
Input Color Space
(page 72) setting in the
full menu.
S-Gamut3.Cine/SLog3 or
S-Gamut3/SLog3:
Log/ R709(800%)
HLG(Natural):
HLG(Natural)/
R709(800%)
HLG(Live):
HLG(Live)/ R709(800%)
Rec.2020/User Gamma:
User Gamma/
R709-Like
Rec.709/User Gamma:
User Gamma
Selects the type of viewfinder/monitor screen
output image.
[Notes]
• An SDR gain value (–12 dB) is applied to the
viewfinder/monitor output image.
• You can change the output gain using SDR Gain
when set to R709(800%) or R709-Like.
ProRes When RM/RCP Paint Control is
set to Off:
Log /Look/---
Selects the LUT to apply to the ProRes
recording image.
[Note]
“---” (disabled) is displayed when Project > Basic
Setting > Recording Format (page 72) is set to
X-OCN format in the full menu.
When RM/RCP Paint Control is
set to On:
Log/HLG(Natural)/
HLG(Live)/User Gamma
The ProRes recording image setting is display
only, because it is determined by the Project >
Basic Setting > Input Color Space (page 72)
setting in the full menu.