35
2
Press EQ MEMORY.
The personal file number appears in the
display.
3
Use the jog dial to select the file
number (P FILE) where you want to
store the sound effect.
4
Press ENTER/NEXT.
The adjusted sound effects are stored
under the selected file number. The
settings previously stored at this
memory location are erased and
replaced by the new settings.
Naming the personal file
1
Press OPEN/CLOSE or place your hand to
the sliding sensor to slide the panel. Press
NAME IN.
2
Use the jog dial to select the file number
you want to name.
3
Press ENTER/NEXT.
4
Use the jog dial to select a character then
press + to enter the next character.
5
Press ENTER/NEXT when you have
entered the file name. The file name is
stored.
Tips
• To change the type of characters quickly, press
CHAR.
• To move to the previous character, press –.
• To delete the character, press DELETE.
• To insert a character, press INSERT.
To call up the personal file
1
Press P FILE to display the last selected
personal file.
2
Use the jog dial to select the personal file
you desire.
3
Press ENTER/NEXT.
Tip
The programmed P file will be retained for a day if
the power cord is unplugged or there is a power
failure.
DAILY 1 2 REC SLEEP
DOLBY NR
REPEAT1
SHUFFLE
ALL 1
TUNED
MONO
STEREO
SYNC
STEP
MHz
kHz
REC
t
VOLUME
1
ß
DAILY 1 2 REC SLEEP
DAILY 1 2 REC SLEEP
DOLBY NR
DOLBY NR
PROGRAM
REPEAT1
SHUFFLE
ALL DISCS
1
TUNED
MONO
STEREO
SYNC
STEP
MHz
kHz
REC
t
VOLUME
1
ß
DOLBY NR
PROGRAM
REPEAT1
SHUFFLE
ALL
DISCS
1
TUNED
MONO
STEREO
SYNC
STEP
MHz
kHz
REC
SUR
t
VOLUME
1
DAILY 1
2 REC SLEEP