12
2
Press
6
OPEN/CLOSE and place a
CD.
Then press again to close the disc tray.
If the indicator for the tray you want to
record is not lit green, press DISC SKIP
EX-CHANGE repeatedly so that it lights
green.
3
Press CD SYNCHRO.
Deck B stands by for recording and the
CD player stands by for playback.
·
(for front side) lights up.
4
Press DIRECTION MODE
repeatedly to select
A
to record on
one side. Select
a
(or RELAY) to
record on both sides.
5
Press PAUSE
P
on deck B.
Recording starts.
To stop recording
Press
π
on deck B or
p
on the CD player.
Tips
• If you want to record from the reverse side, press
ª
so that
ª
(for reverse side) lights up.
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• When you want to reduce the hiss noise in low-
level high-frequency signals, press DOLBY NR so
that “DOLBY NR B” appears after pressing CD
SYNCHRO.
Notes
• You cannot listen to other sources while recording.
• Dolby NR and DIRECTION MODE (
a
or
RELAY) is off when the mains AC power supply
is switched off.
With the label
side up. When
you play a single
CD, place it on
the inner circle
of the tray.
Recording a CD
— CD Synchro Recording
The CD SYNCHRO button lets you record
from a CD to a tape easily. You can use TYPE
I (normal) or TYPE II (CrO
2
) tapes. The
recording level is adjusted automatically.
1
Press
§
and insert a blank tape into
deck B.
2
0
)
REC/PLAY
B
ª
AUTO REVERSE
·S E
5
1
4
2
1
3
With the side
you want to
record facing
forward
3
2
1
3
§
π
p
DISC SKIP
EX-CHANGE
DOLBY NR
