49
GB
Ne
twork
MHC-V90DW.GB.4-694-841-
35
(1)
Network
Selecting the method
of network connection
If you connect this system to a
network, you can enjoy this system
in various ways. Depending on your
network environment, setting up
methods are different. Select the
appropriate connecting method
for your network environment from
below.
Note
•
•
Connecting to a Wi-Fi network and a
wired network simultaneously is not
possible. When you connect to a Wi-Fi
network, be sure to disconnect the LAN
cable from the unit.
•
•
Depending on the function, the system
may need to be updated.
Hint
For setting the fixed IP address, use the
screen in step 6 of “Connecting with a
computer” (page 49).
Method for using a smartphone/
iPhone
Installing the “SongPal” application
to your smartphone/iPhone is
required.
Before making the connection, be
sure to turn on the BLUETOOTH
feature on your smartphone/
iPhone, then operate the “SongPal”
application to connect your
smartphone or iPhone to this
system via BLUETOOTH.
For details, refer to the Wi-Fi Startup
Guide (separate document).
Method for using a wireless
router with a WPS (AOSS) button
Touch and hold WPS on the unit,
then press the Wi-Fi Protected
Setup™ (WPS) button of the wireless
router. For details, refer to the Wi-Fi
Startup Guide (separate document).
Method for using computer
See “Connecting with a computer”
(page 49).
Method for using wired network
Refer to Help Guide for details.
http://rd1.sony.net/help/has/
mhc-v90dw/h_zz/
Connecting with a
computer
If your wireless router does not have
a WPS (AOSS) button, configure
Wi-Fi settings by connecting the unit
to your computer with a LAN cable
(not supplied).
Hint
When setting up a Wi-Fi network, the
SSID (Wi-Fi Network Name) and security
key (WEP or WPA key) may be required.
The security key (or network key) uses
encryption to limit the devices with which
communication can occur. It is used
to provide higher security for devices
communicating via a wireless router/
access point.
