MHC-V77DW
5
PLAYABLE DISCS
• AUDIO
CD
• CD-R/CD-RW/DVD-R/DVD-RW
–
audio
data
–
MP3
fi
les that conforms to ISO9660 Level 1/Level 2, or
Joliet (expansion format).
Notes
• MP3 (MPEG 1 Audio Layer-3) is a standard format de
fi
ned
by ISO (International Organization for Standardization) which
compresses audio data. MP3
fi
les must be in MPEG 1 Audio
Layer-3 format.
• The system can only play back MP3
fi
les that have a
fi
le
extension of “.mp3”.
• JIG
When disassembling the set, use the following jig (for front
panel removal).
Part No.: J-2501-238-A JIG FOR SPEAKER REMOVAL
NOTE OF REPLACING THE IC8001 AND IC8003 ON
THE 89G BOARD
IC8001 and IC8003 on the 89G board cannot exchange with
single. When these parts on the 89G board are damaged, exchange
the entire mounted board.
NOTE OF REPLACING THE IC6001, IC6002, IC6202,
IC6203, IC6341, IC6342, IC6602, IC6901 AND IC6907
ON THE BENTEN-MOTHERBOARD BOARD
IC6001, IC6002, IC6202, IC6203, IC6341, IC6342, IC6602,
IC6901 and IC6907 on the BENTEN-MOTHERBOARD board
cannot exchange with single. When these parts on the BENTEN-
MOTHERBOARD board are damaged, exchange the entire
mounted board.
NOTE OF REPLACING THE IC8902 ON THE FM-
TUNER BOARD
IC8902 on the FM-TUNER board cannot exchange with single.
When this part on the FM-TUNER board is damaged, exchange
the entire mounted board.
NOTE OF REPLACING THE IC001 AND IC002 ON
THE SENSOR BOARD
IC001 and IC002 on the SENSOR board cannot exchange with
single. When these parts on the SENSOR board are damaged,
exchange the entire mounted board.
NOTE OF REPLACING THE CUSHION REAR ON THE
COVER REAR ASSY
When the cover rear assy is disassembled from the set, replace the
old cushion rear on the cover rear assy with a new cushion rear.
cushion, rear
cover, rear assy
NOTE OF REPLACEMENT OF THE MS-476 BOARD
When the MS-476 board is defective, exchange the entire
LOADING COMPLETE ASSY (T).
IMPORTANT NOTE OF REPLACING THE BENTEN-
MOTHERBOARD BOARD
When the BENTEN-MOTHERBOARD board is replaced, be sure
to perform the following work.
1. Stick the new MAC address label on the rear side of this unit.
•
Sticking method of MAC address label
2. Perform the connection check of wireless LAN (Refer to
“CHECKING METHOD OF WIRELESS LAN CONNEC-
TION” on this page).
3. The MAC address has been changed. Print the following
explanations, and pass it to the customer together with repaired
unit.
Note of the MAC address change:
The MAC address of this unit was changed along with this repair.
Please set it again if you are using the MAC address filtering
function of access point device connection destination.
When registration of client devices to the DLNA server device
is not automatic, it is necessary to register this unit into a server
again.
MAC address is displayed on rear side of this unit.
MAC1: MAC address of LAN(100)
MAC2: MAC address of wireless LAN
CHECKING METHOD OF WIRELESS LAN CONNEC-
TION
When the BENTEN-MOTHERBOARD board is replaced, be sure
to perform the connection check of wireless LAN.
Required item:
• Wireless router with the Wi-Fi Protected Setup™ (WPS)
button
Procedure:
1. Press the [
1
] (power) button to turn on the system.
When the system is on, the power indicator lights up in green.
1
– Rear view –
location of MAC
address label
HOME AUDIO SYSTEM
~ 120-240 V 50/60 Hz 220 W
Manufactured under license from Dolby
Laboratories. Dolby and the double-D
symbol are trademarks of Dolby Laboratories
HECHO EN MALASIA
Only for Mexico / Sólo para México
Only for Chile / Sólo para Chile
Homologaciòn No: XXXXXXXXX-XXXX
Modelo: DHSR-SY30
Marca: Wistron NeWeb Corporation
Homologaciòn No: XXXXXXXXX-XXXX
Modelo: DHSR-SY25
Marca: Wistron NeWeb Corporation
N0. SERIE/
N
Ɩ
SERIE
0000005
NOM
NYCE
05/2016
MODEL NO. / MODELO : MHC-V77DW
R
4-595-019-01 LA9
