Sony MHC-V72D, Руководство по эксплуатации

Страница: 50 / 80

MHC-V82D/MHC-V72D.GB.5-000-538- 13(1)
50
GB
2
Plug in the AC power cord
(mains lead) and turn on all the
systems.
3
Adjust the volume on each
system.
4
Touch FUNCTION repeatedly on
the Party Host to select the
function you want.
If all the systems are equipped with
the Wired Party Chain function, do
not select the AUDIO IN function. If
you select this function, sound
cannot be output.
5
Start playing the music, then
touch PARTY CHAIN on the Party
Host.
“PARTY CHAIN” appears on the
display. The Party Host starts the
Wired Party Chain, and other
systems become Party Guests
automatically.
“WIRED P.CHAIN” lights up on the
display of Party Host and Party
Guests.
Note
•
•
Depending on the total unit of systems
you have connected, Party Guests may
take some time to start playing the
music.
•
•
Changing the volume level and sound
effect on the Party Host will not affect
the output on the Party Guests.
• •
The Party Guest continues playing the
music source as Party Host even when
you change the function on Party Guest.
However, you can adjust the volume
and change the sound effect on Party
Guest.
•
•
When you use the microphone or play
the guitar on Party Host, the sound will
not be output from Party Guests.
•
•
When one of the systems in the chain
is performing USB transfer, wait for the
system to complete or stop the transfer
before you activate the Wired Party
Chain function.
•
•
For detailed operation on other
systems, refer to the operating
instructions of the systems.
To select a new Party Host (when
all the systems are equipped
with the Wired Party Chain
function)
Repeat steps 4 and 5 on the system
to be used as a new Party Host. The
current Party Host becomes Party
Guest automatically.
Note
•
•
You can select another system as the
new Party Host only after the Wired
Party Chain function of all the systems
in the Chain has been activated.
•
•
If the selected system does not become
a new Party Host after a few seconds,
repeat steps 4 and 5.
To deactivate the Wired Party
Chain
Touch PARTY CHAIN on the Party
Host.
“LEAVE PARTY” appears on the
display.
Note
If the Wired Party Chain function is not
deactivated after a few seconds, touch
PARTY CHAIN on the Party Host again.
Setting a Wired Party Chain
sound mode
You can set a sound mode when
the Wired Party Chain function is
activated.
1
Press OPTIONS.
2
Press / repeatedly to select
“P CHAIN MODE”, then press
.