MHC-V71/V71D
19
2-11. FRONT PANEL (VANILLA) SECTION
1
three screws
(+ flat tapping
screw - ED BK)
4
sound generator 12cm
5
three screws
(+ flat tapping
screw - ED BK)
9
three screws
((4x13)(TR-184A))
2
seven claws
6
seven claws
8
sound
generator 12cm
– Front view –
qa
Insert the jig into a space and
slowly remove the panel, front
(vanilla) section.
Note 1:
When using a jig, please
work so as not to injure
panel, front (vanilla)
section and speaker
cabinet.
qh
panel, front (vanilla) section
Note 2:
When installing the
panel, front (vanilla)
section, remove the used
glue and use a new glue to
fix the panel, front
(vanilla).
qs
All bosses are removed while moving jig in the
direction of the arrow, and panel, front (vanilla)
section is removed.
qs
All bosses are removed while moving
jig in the direction of the arrow, and
panel, front (vanilla) section is removed.
qg
Remove the
panel, front
(vanilla)
section in the
direction
of an arrow.
q;
Insert the jig into a space
and slowly remove the
panel, front (vanilla) section.
Note 1:
When using a jig,
please work so as
not to injure
panel, front (vanilla) section
and speaker cabinet.
3
Slide out to remove the sound
generator 12cm in the direction
of the arrow.
7
Slide out to remove the
sound generator 12cm
in the direction of the arrow.
total seventeen bosses
• Wire setting
top side
qf
Push the protrusion,
and remove the
terminal (wide side) [red].
qf
Push the protrusion, and
remove the terminal
(narrow side) [red/black].
protrusion
• Wire setting
top side
qd
Push the protrusion, and remove
the terminal (narrow side) [blue/black].
qd
Push the protrusion, and
remove the terminal (wide side) [blue].
protrusion
loudspeaker
(5cm) (SP2)
loudspeaker
(5cm) (SP4)
Ver. 1.1
SYS SET
2018/05/30 01:52:46 (GMT+09:00)
