![background image](http://html.mh-extra.com/html/sony/mhc-rg55/mhc-rg55_operating-instructions-manual_1330074034.webp)
34
GB
Precautions (continued)
Specifications
Amplifier section
European model:
MHC-RG66
DIN power output (rated) 115 + 115 watts (6 ohms
at 1 kHz, DIN)
Continuous RMS power output (reference)
140 + 140 watts (6 ohms
at 1 kHz, 10% THD)
Music power output (reference)
280 + 280 watts (6 ohms
at 1 kHz, 10% THD)
MHC-RG55S
Front speaker
DIN power output (rated) 50 + 50 watts (6 ohms at
1 kHz, DIN)
Continuous RMS power output (reference)
60 + 60 watts (6 ohms at
1 kHz, 10% THD)
Music power output (reference)
120 + 120 watts (6 ohms
at 1 kHz, 10% THD)
Sub woofer
DIN power output (rated) 100 watts (12 ohms at
40 Hz, DIN)
Continuous RMS power output (reference)
120 watts (12 ohms at
40 Hz, 10% THD)
Music power output (reference)
120 watts (12 ohms at
40 Hz, 10% THD)
Other models:
MHC-RG66
The following measured at AC 120, 220, 230 –
240 V, 50/60 Hz
DIN power output (rated) 115 + 115 watts (6 ohms
at 1 kHz, DIN)
Continuous RMS power output (reference)
140 + 140 watts (6 ohms
at 1 kHz, 10% THD)
MHC-RG55
The following measured at AC 120, 220, 230 –
240 V, 50/60 Hz
DIN power output (rated) 100 + 100 watts (6 ohms
at 1 kHz, DIN)
Continuous RMS power output (reference)
120 + 120 watts (6 ohms
at 1 kHz, 10% THD)
Before placing a cassette in the tape
deck
Take up any slack in the tape. Otherwise the tape may
get entangled in the parts of the tape deck and become
damaged.
When using a tape longer than 90
minutes
The tape is very elastic. Do not change the tape
operations such as play, stop, and fast-winding
frequently. The tape may get entangled in the tape
deck.
Cleaning the tape heads
Clean the tape heads after every 10 hours of use.
Be sure to clean the tape heads before you start an
important recording or after playing an old tape. Use
a separately sold dry-type or wet-type cleaning
cassette. For details, refer to the instructions of the
cleaning cassette.
Demagnetizing the tape heads
Demagnetize the tape heads and the metal parts that
have contact with the tape every 20 to 30 hours of use
with a separately sold demagnetizing cassette. For
details, refer to the instructions of the demagnetizing
cassette.