Sony MHC-NX1 страница 2 Скачать руководство пользователя | Manualshive

Страница: 2 / 44

background image

2

WARNING

To prevent fire or shock hazard, do not
expose the unit to rain or moisture.

To avoid electrical shock, do not open the cabinet.
Refer servicing to qualified personnel only.

Do not install the appliance in a confined space,
such as a bookcase or built-in cabinet.

This appliance is classified
as a CLASS 1 LASER
product. The CLASS 1
LASER PRODUCT
MARKING is located on
the rear exterior.

INFORMATION

This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no guarantee
that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which
can be determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment

and receiver.

– Connect the equipment into an outlet on a circuit

different from that to which the receiver is
connected.

– Consult the dealer or an experienced radio/TV

technician for help.

CAUTION

You are cautioned that any changes or modifications
not expressly approved in this manual could void
your authority to operate this equipment.

NOTICE FOR THE CUSTOMERS IN
CANADA

CAUTION:

TO PREVENT ELECTRIC SHOCK, DO NOT USE
THIS POLARIZED AC PLUG WITH AN
EXTENSION CORD,
RECEPTACLE OR OTHER OUTLET UNLESS THE
BLADES CAN BE FULLY INSERTED TO PREVENT
BLADE EXPOSURE.

This stereo system is equipped with the Dolby B-
type noise reduction system*.
* Manufactured under license from Dolby

Laboratories Licensing Corporation.
DOLBY and the double-D symbol

a

are

trademarks of Dolby Laboratories Licensing
Corporation.

NOTICE FOR THE CUSTOMERS IN THE
U.S.A.

This symbol is intended to alert the
user to the presence of uninsulated
“dangerous voltage” within the
product’s enclosure that may be of
sufficient magnitude to constitute a
risk of electric shock to persons.

This symbol is intended to alert the
user to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the appliance.

CAUTION

The use of optical instruments with this product will
increase eye hazard.

The MHC-NX1 consist of the following
components:

– A/V control amplifier STR-NX1
– CD player/Stereo cassette deck HTC-NX1
– Speaker system

SS-NX1

«
1
2
3
4
...
»

Содержание MHC-NX1













































Отзывы:

Нет отзывов

Похожие инструкции для MHC-NX1

Бренд: YOKOGAWA Страницы: 132

Бренд: Keithley Страницы: 97

Бренд: Paradox Страницы: 72

Бренд: Panasonic Страницы: 5

Бренд: Panasonic Страницы: 14

Бренд: Panasonic Страницы: 2

Бренд: salmson Страницы: 12

Бренд: ICP DAS USA Страницы: 4

Бренд: Panasonic Страницы: 16

Бренд: ATD Tools Страницы: 24

Vizzyalarm VZW-02

Бренд: Alderon Industries Страницы: 6

Бренд: Funktel Страницы: 28

Бренд: PrimeWeld Страницы: 23

Бренд: Razer Страницы: 16

Бренд: M-system Страницы: 4

Бренд: JBL Страницы: 8

Бренд: Memorex Страницы: 2

Бренд: Nissindo Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды