MHC-GZR999D/GZR888D/GZR777D.GB.4-181-571-11(1)
10
GB
Locate the antennas as far away from
the speaker cords and the power cord
as possible, to avoid picking up noise.
Try turning off the surrounding
electrical equipment.
A stereo FM program cannot be
received in stereo.
Press REPEAT/FM MODE repeatedly
until “MONO” disappears from the
display.
Tape deck (except for Latin American
models)
The tape does not record or
playback, or there is a decrease in
sound level.
The tape heads are dirty (see “Cleaning
the tape heads” (page 128)).
There is excessive wow or flutter, or
the sound drops out.
The capstans or pinch rollers are
dirty (see “Cleaning the tape heads”
(page 128)).
The tape does not record.
No tape is loaded. Load a tape.
The tab has been removed from
the tape. Cover the broken tab with
adhesive tape (page 128).
The tape has reeled to the end.
Optional components
There is no sound.
Refer to General item “There is no
sound.” (page 108) and check the
condition of the system.
Connect the component properly
(page 105) while checking:
if the cords are connected properly.
if the cord plugs are firmly inserted
all the way.
Turn on the connected component.
Refer to the operating instructions
supplied with the connected
component and start playback.
To change the AM tuning interval
(Except for Saudi Arabian models)
The AM tuning interval is factory-preset
to 9 kHz (or 10 kHz for some areas).
Use buttons on the unit for the operation.
1
Press TUNER/BAND repeatedly to
select “AM.”
2
Press
/
to turn off the system.
3
Press DISPLAY repeatedly until “Sony
DEMO” appears in the display.
4
Press
/
while holding down
.
“AM 9K STEP” or “AM 10K STEP”
appears in the display.
When you change the interval, all the
AM preset stations are erased.
Содержание MHC-GZR777D
