background image

MHC-GN800    4-244-569-

11

 (1)

Tape

19

GB

4

Set the time to start recording.

Press 

or 

m

 repeatedly to set the hour,

then press PUSH ENTER (or ENTER on
the remote).
The minute indication starts flashing.
Press 

or 

m

 repeatedly to set the minute,

then press PUSH ENTER (or ENTER on
the remote).

5

Repeat step 4 to set the time to stop
recording.

The start time appears, followed by the stop
time, the preset radio station to be recorded
(e.g., “TUNER FM 5”), then the original
display appears.

6

Insert a recordable tape into deck B.

Make sure the tape is in forward direction.

7

Press 

@/1

 to turn off the power.

When the recording starts, the volume level
is set to the minimum.

To

Check the setting

Change the setting

Cancel timer
operation

Notes

• If you do not turn off the power before the preset

time, the timer-recording does not function.

• The power will turn on 15 seconds before the preset

time.

Do this

Press CLOCK/TIMER
SELECT on the remote and
press 

or 

m

 repeatedly to

select “REC SELECT?”. Then,
press PUSH ENTER (or
ENTER on the remote).

Start from step 1.

Press CLOCK/TIMER
SELECT on the remote and
press 

or 

m

 repeatedly to

select “TIMER OFF?”. Then,
press PUSH ENTER (or
ENTER on the remote).

Downloaded From Disc-Player.com Sony Manuals

Содержание MHC-GX8800 - Mini Stereo System





































Отзывы: