![background image](http://html.mh-extra.com/html/sony/mhc-gt4d/mhc-gt4d_operating-instructions-manual_1330035017.webp)
17
GB
Ge
tting S
tar
te
d
filename[C:\Users\DTP9\Desktop\SO160027\MHC-GT4D (PMRF
03)\4584051141_GB\050CON.fm]
masterpage:Right
model name [MHC-GT4D]
[4-584-051-
14
(1)] GB
Use screws (not supplied) that are
suitable for the wall material and
strength. As a plaster board wall is
especially fragile, attach the screws
securely to a wall stud. Install the
speaker system on a vertical and flat
reinforced area of the wall.
Be sure to subcontract the installation to
Sony dealers or licensed contractors and
pay special attention to safety during
the installation.
Sony is not responsible for accidents or
damage caused by improper
installation, insufficient wall strength,
improper screw installation or natural
calamity, etc.
1
Prepare screws (not supplied) that
are suitable for the holes on the
back of the speaker system.
2
Drive the screws to the wall.
The screws should protrude 6 mm
to 7 mm from the wall.
To install the speaker units
horizontally
To install the speaker units
vertically
3
Hang the speaker system onto the
screws.
Align the holes on the back of the
speaker system to the screws, then
hang the speaker system onto the
screws.
To install the speaker units
horizontally
Installing the speaker units
on a wall
Notes
4 mm
More than 25 mm
5 mm
Hole on the back of the speaker
system
10 mm
5 mm
277 mm
6 mm to 7 mm
277 mm
6 mm to 7 mm
Содержание MHC-GT4D
Страница 71: ......