Basic Operations
21
3
Press TAPE A
(
or TAPE B
(
(or
DECK A
(
or DECK B
(
on the
remote).
Press TAPE A
9
or TAPE B
9
to play
the reverse side. (Press DECK A
(
or
DECK B
(
again on the remote to play
the reverse side.) The tape starts playing.
* The deck stops automatically after repeating the
sequence five times.
**Relay play always follows the following sequence:
Deck A (front side), Deck A (reverse side), Deck B
(front side), Deck B (reverse side).
To
Do this
Stop play
Press
p
.
Pause
Press PAUSE (or
P
on the
remote). Press again to
resume play.
Fast-forward
Press
0
or
)
.
Rewind
Press
0
or
)
.
Remove the cassette Press
§
.
Adjust the volume
Turn VOLUME (or press
VOL +/– on the remote).
Tips
• Pressing TAPE A
9(
or TAPE B
9(
when
the system is off automatically turns the system on
and starts tape playback if there is a tape in the
deck (One Touch Play).
• You can switch from another source to the tape
deck just by pressing TAPE A
9(
or TAPE B
9(
(Automatic Source Selection).
Searching for the start of the
current or the next track (AMS)
During play, turn the jog dial to the same
direction as the
9
or
(
indicator to go
forward. “TAPE A (or TAPE B) >>> +1”
appears. Turn to the opposite direction to go
back. “TAPE A (or TAPE B) <<< –1” appears.
(Or press
=
or
+
on the remote.)
Notes
The AMS function may not operate correctly under
the following circumstances:
– When the unrecorded space between songs is less
than 4 seconds long.
– If completely different information is recorded on
the left and right channels.
– When there are continuous sections of extremely
low level or low frequency sound (like those of a
baritone sax).
– When the unit is placed near a television. (In this
case, we recommend moving the unit farther away
from the television or turning off the television.)