![background image](http://html.mh-extra.com/html/sony/mhc-gnz333d/mhc-gnz333d_operating-instructions-manual_1330003060.webp)
MHC-GNZ444D/GNZ333D/GNZ333DL.GB.3-106-465-14(1)
0
GB
8
To listen to a preset station,
press /
repeatedly
to select the preset station you
want.
You can also press the numeric
buttons
, then press ENTER
to
select a preset station.
To stop automatic scanning
Press
.
To cancel presetting
Press DVD/TUNER MENU
.
Tip
You can set a frequency directory with the
numeric buttons by pressing D. TUNING
button
.
Listening to a non-preset radio
station/station with a weak
signal
1
Press FU/
repeatedly to select “TUNER FM”
or “TUNER AM” (or press TUNER/
BAND
on the unit repeatedly
to select “FM” or “AM”).
2
Press
/
(or TUNING
+/
on the unit)
repeatedly
to tune in the station you want.
To change the AM tuning interval
The AM tuning interval is factory-preset
to 9 kHz or 10 kHz (for some areas: this
function is not available on the Russian
and Saudi Arabian models).
Use buttons on the unit.
1
Press FUNCTION
repeatedly to
select “TUNER AM” (or press TUNER/
BAND
repeatedly to select “AM”).
2
Press
/
to turn off the system.
3
Press DISPLAY
to display the clock.
4
While the clock is displayed, hold
down
and
/
to
turn on the system.
“AM 9K STEP” or “AM 10K STEP”
appears in the display.
When you change the interval, all the
AM preset stations are erased.
Note
“––:––” appears in the display if you have not
set the clock.
Tips
To improve broadcast reception, adjust the
supplied antennas, or connect an external
antenna.
When an FM stereo program has static noise,
press REPEAT/FM MODE
repeatedly
until “MONO” lights up in the display. There
will be no stereo effect, but the reception will
improve.