Ti
mer
59
GB
You can record from a preset radio station from
a specified time.
To make timer recording, you must first preset
the radio station (see “Presetting radio stations”
on page 43) and set the clock (see “Setting the
clock” on page 13).
1
Tune in the preset radio station (see
“Listening to a preset station” on
page 45).
2
Press CLOCK/TIMER SET.
“SET” appears in the display and then
“PLAY SET?” flashes in the display.
3
Press
M
or
m
repeatedly (or turn –
.
>
+ clockwise or counterclockwise
on the unit) to select “REC SET?”, then
press ENTER.
“ON” appears and the hour indication
flashes in the display.
4
Set the time to start recording.
Press
M
or
m
repeatedly (or turn –
.
>
+ clockwise or counterclockwise on
the unit) to set the hour, then press ENTER.
The minute indication flashes in the
display.
Press
M
or
m
repeatedly (or turn –
.
>
+ clockwise or counterclockwise on
the unit) to set the minute, then press
ENTER.
5
Set the time to stop recording following
the same procedure as step 4.
The type of timer (“REC TIMER”),
followed by the start time, the stop time and
the preset radio station to be recorded (e.g.,
“TUNER FM 5”) appears in the display in
sequence before the original display
returns.
6
Load a recordable tape into deck B.
Make sure the tape is in front side.
7
Press DIRECTION repeatedly on the
unit to select “
g
” to record on one
side or “
j
” (or “RELAY”) to record
on both sides.
For recording from the reverse side, press
FU/– (or TAPE A/B on the unit)
repeatedly until “TAPE B” appears in the
display. Then, press
nN
repeatedly until
TAPE B reverse side indicator lights up to
start playback of reverse side. Press
x
at
the point where you want to start recording.
When you record on both sides, be sure to
start from the front side. If you start from
the reverse side, recording stops at the end
of reverse side.
8
Press
?/1
to turn off the system.
Other operations
Timer recording radio
programs
To
Do this
Check the setting
1
Press CLOCK/TIMER
SELECT.
“SELECT” appears in the
display.
2
Press
M
or
m
repeatedly (or
turn –
.
>
+ clockwise
or counterclockwise on the
unit) to select “REC
SELECT?”, then press
ENTER.
Change the setting
Start from step 1.
Cancel the Timer
Recording
1
Press CLOCK/TIMER
SELECT.
“SELECT” appears in the
display.
2
Press
M
or
m
repeatedly (or
turn –
.
>
+ clockwise
or counterclockwise on the
unit) to select “TIMER
OFF?”, then press ENTER.
continued