background image

32

.

nN

X

x

m

M

>

CLOCK/TIMER 

SELECT

1

Tune in the preset radio station (see
“Listening to the radio” on page 13).

2

Press CLOCK/TIMER SET.

“SET (DAILY 1)” appears.

3

Press 

or 

>

 repeatedly to

select “REC”, then press ENTER.

“ON” appears and the hour indication
flashes in the display.

You can record a preset radio station from a
specified time.

To timer-record, you must preset the radio
station (see “Step 3: Presetting radio stations”
on page 7) and set the clock (see “Step 2:
Setting the time” on page 6) beforehand.

3,4,5

3,4,5

2

7

Timer-recording radio
programs

8

Press ENTER.

The type of timer (DAILY 1 or DAILY 2),
followed by the start time, stop time, and
the music source, appear, then the
original display appears.

9

Turn off the power.

To check the setting

Press CLOCK/TIMER SELECT and press

or 

>

 repeatedly to select the

respective mode (DAILY 1 or DAILY 2), then
press ENTER.

To change the setting, start over from step 1.

To cancel the timer operation

Press CLOCK/TIMER SELECT and press

or 

>

 repeatedly to select “TIMER

OFF”, then press ENTER.

Tip

The power turns on 15 seconds before the preset
time.

Notes

• You cannot activate DAILY 1 and DAILY 2 Timer

at the same time.

• You cannot set the timer if the starting time and

stopping time are the same.

• When you use the Sleep Timer, Daily Timer will

not turn on the system until the Sleep Timer turns
it off.

• You cannot activate Daily Timer and Timer-

recording at the same time.

Waking up to music (continued)

1 2

REC

SLEEP

VOLUME

ALL DISCS

ß

Содержание MHC-BX2













































Отзывы: