background image

22

Recording a CD by specifying
track order

— Program Edit

When programing, make sure the playing times
for each side do not exceed the length of one
side of the tape.

1

Load a recordable tape into deck B.

2

Press CD.

3

Press PLAY MODE repeatedly until
“PGM” appears.

4

Turn DISC ACCESS (or press 

T

DISC

or DISC

t

 on the remote) to select a

CD.

To program all the tracks on a CD at once,
go to step 6 with “CDAL” displayed.

5

Press – 

.

 or 

+ (or 

.

 or 

>

on the remote) repeatedly until the
desired track appears.

6

Press ENTER.

The track is programed. The programed
track and corresponding step (playing order)
appear, followed by the total playing time.

7

Repeat steps 5 and 6 for the same disc
or 4 to 6 for tracks from another disc to
program additional discs or tracks.

8

Press CD SYNCHRO.

Deck B stands by to record in the direction
of the indication. The CD player pauses for
play.

9

Press DIRECTION repeatedly to select

g

 to record on one side. Select 

j

(or RELAY) to record on both sides.

10

Press REC PAUSE/START.

Recording starts.

Tip

If you select both sides recording and the tape reaches
the end of the front side part-way through a track, the
entire track is recorded again from the beginning of
the reverse side.

Recording to a tape (continued)

Содержание MG110









































Отзывы: