16
Usage Notes
“Memory Stick” Media
Notes on using “Memory Stick”
media
•
Do not remove “Memory Stick” while data
is being read or written.
•
Data may be damaged if:
–
You remove “Memory Stick” or
disconnect the USB cable while data is
being read or written.
–
You use “Memory Stick” in a place
where it is susceptible to static electricity
or electric noise.
•
You can keep backup copies of important
data on a “Memory Stick.”
•
Avoid touching the metal terminals on the
“Memory Stick” to prevent damage from
static discharge.
•
Do not subject the “Memory Stick” to
excessive stress or shock.
•
Do not disassemble or modify “Memory
Stick.”
•
Keep “Memory Stick” and other media
away from water, excessive heat and
humidity, and from corrosive elements.
•
Do not use or keep “Memory Stick” under
an unfavorable condition as below:
–
Extremely hot place (such as in a parked
car with windows closed in summer, a
spot under direct sunlight, or near an
electrical appliance that radiates heat).
–
Humid place.
–
Place near corrosive substances.
•
If you set Write-Protected switch “LOCK,”
data cannot be recorded, edited, or erased.
•
Do not stick anything other than the
supplied labels on the label area of
“Memory Stick.”
•
Stick a label precisely within the label area.
Make sure that the label does not go beyond
the area.
•
Carry and keep “Memory Stick” in the
supplied case.
Notes on using “Memory Stick Duo/
Memory Stick PRO Duo”
•
When you use “Memory Stick Duo/
Memory Stick PRO Duo” without Write-
Protected switch, be careful not to edit or
erase important data by mistake.
•
When you use “Memory Stick Duo/
Memory Stick PRO Duo” with Write-
Protected switch, data cannot be recorded,
edited, or erased by “LOCK” the switch.
•
Use an object with a sharp tip to move the
Write-Protected switch.
•
Do not press on the memo area strongly
when writing.
•
Carry and keep “Memory Stick” in the
supplied case.
Terminal
Label area
Write-
Protected
switch
Terminal
Memo area
Write-
Protected
switch
Содержание Memory Stick MRW62E-S2
Страница 21: ......
