Sony MDS-E10, Руководство по обслуживанию

Страница: 30 / 94

— 30 —
23
Recor
ding on MDs
Marking Track Numbers
While Recording
(Track Marking)
You can mark track numbers either manually or
automatically while recording. By marking track numbers
at specific points, you can quickly locate the points later or
edit the MD easily.
AMS
MENU/NO YES
Marking track numbers manually (Manual
Track Marking)
Press z at the point where you want to add a track
number while recording.
Marking track numbers automatically
(Automatic Track Marking)
When recording from a CD player or MD recorder
connected to the DIGITAL IN connector, the recorder
marks track numbers in the same sequence as the source.
When recording from other sources connected to the
DIGITAL IN connector or a source connected to the
ANALOG IN jacks, do the procedure below to mark track
numbers automatically. However, if you hear much noise
from the sources of tapes or radios, the recorder cannot
mark track numbers.
1
While the recorder is stopped, press MENU/NO
twice.
“Setup Menu” appears in the display.
2
Turn AMS (or press . / > repeatedly) until “Track
Mark” appears, then press AMS or YES.
3
Turn AMS (or press . / > repeatedly) to select
the setting, then press AMS or YES.
Automatic tracking marking Select
Turned on at input level Level Sync
Turned on at the interval Interval
of the fixed time
Turned off
Off
4
Press MENU/NO.
To set the level of input signals for Automatic
Track Marking of “Level Sync”
The recorder marks a track number whenever the input of
a signal at the set level or below continues for at least 1.5
seconds and a signal at the set level or above is also input.
1
While the recorder is stopped, press MENU/NO
twice.
“Setup Menu” appears in the display.
2
Turn AMS (or press . / > repeatedly) until “Tr
Mark Level” appears, then press AMS or YES.
3
Turn AMS (or press . / > repeatedly) to select
the level at any value from a range of _ 72 dB, _ 68
dB, _ 60 dB, _ 54 dB, and _ 48 dB, then press AMS or
YES.
4
Press MENU/NO.
To set the interval time of Automatic Track
Marking
The recorder marks a track number at intervals at the set
time.
1
While the recorder is stopped, press MENU/NO
twice.
“Setup Menu” appears in the display.
2
Turn AMS (or press
.
/
>
repeatedly) until
“Interval” appears, then press AMS or YES.
3
Turn AMS (or press . / > repeatedly) to select
the time at any value from a range of 1 minute to
10 minutes, then press AMS or YES.
Note
When the track number of program sources (CD or MD)
changes, a track number changes automatically, or you
want to change the track number by
z (REC), the recorder
marks a track number at the interval of the fixed time from
the beginning of the changed track number.
z
Additional information on Automatic Track Marking
• When recording from a CD player or MD recorder
connected to the DIGITAL IN connector, the entire
material may be recorded as a single track in the
following cases:
- When you consecutively record the same track two or
more times using single-track repeat play.
- When you consecutively record two or more tracks
with the same track number but from different CDs or
MDs.
- When you record tracks from certain CD or multi-disc
players.
In either case, divide tracks after recording (page 45).
• If the source is an MD, a track number may not be
marked for tracks less than 4 seconds long (during
stereo, LP2 stereo, or monaural recording) or less than 8
seconds (during LP4 stereo recording).
24
Recor
ding on MDs
• When recording from a component connected to the
ANALOG IN jacks with “Track Mark Off” selected or
when recording from a DAT recorder or DBS tuner
connected to the DIGITAL IN connector, the entire
material may be recorded as a single track.
• When recording from a DAT recorder or DBS tuner
connected to the DIGITAL IN connector, the recorder
will mark a track number whenever the sampling
frequency of the input signal changes, regardless of the
track marking parameter setting .
z You can mark track numbers even after recording has finished
See “Dividing Tracks” on page 45.
Note
If you turn off the recorder or disconnect the AC power
cord, the recorder will store the last settings of “Track
Mark” and recall them the next time you turn on the
recorder.
Starting Recording With 6
Seconds of Prestored Audio
Data
(Time Machine Recording)
Whenever the recorder is in recording pause, the
recorder’s buffer memory continuously stores the latest 6
seconds worth of audio data. When you press AMS (or
T.REC), the recording then starts with the data in the
buffer memory. Time Machine Recording thus allows you
to avoid missing the beginning of material recorded live
from an FM or satellite broadcast.
AMS
1
Do steps 1 to 7 of “Recording on an MD” on page
18.
The recorder changes to recording pause.
2
Start playing the program source.
3
Press AMS (or T.REC) at the point where you want
to start recording.
Recording starts with the 6 seconds of prestored data in
the buffer memory, then continues recording via the
buffer memory thereafter.
To stop Time Machine Recording
Press x .
Note
The storage of data in the buffer memory starts from the
moment the recorder changes to recording pause. Thus, if
you start recording less than 6 seconds worth of data will
be recorded from the buffer memory.
25
Recor
ding on MDs
Synchro-recording With the
Audio Component of Your
Choice
(Music Synchro-recording)
Z
The Music Synchro-recording allows you to automatically
synchronize recording on the MD recorder with the
playing of the selected ogram source. The Track
Marking function, however, will differ according to the
program source. For details, see “Marking Track Numbers
While Recording” on page 23.
1 2 3 4 5
6 7 8 9 10
11 12 13 14 15
16 17 18 19 20
21 22 23 24 25
M.ACCESS
CONTINUE SHUFFLE PROGRAM
NAME CHAR
RM-DR1J
NUM
> 25
MUSIC SYNC
1
Do steps 1 to 6 of “Recording on an MD” on page
18.
2
Press MUSIC SYNC.
The recorder changes to recording pause.
3
Start playing the program source.
Recording starts automatically.
To stop Music Synchro-recording
Press x .
Note
During Music Synchro-recording, Smart Space and Auto
Cut (page 22) will operate regardless of their setting.
Synchro-recording With a
Sony CD Player (CD
Synchro-recording)
Z
When the recorder is connected to a Sony CD player or Hi-
Fi component system, you can easily copy the contents of
CDs to the MD using the recorder’s remote. As the same
remote operates both the MD recorder and the CD player
or CD player section of the component system, make sure
to place the MD recorder and the CD player as close
together as possible.
Note
• Some CD players do not allow you to synchronize CD
recording with the remote of the recorder. In this case,
use music synchro-recording on this page to synchronize
recording on the CD player and recorder.
• To operate the recorder and CD player, unplug from the
jacks of the recorder and remote and use the remote as
the wireless remote (page 16).
1 2 3 4 5
6 7 8 9 10
11 12 13 14 15
16 17 18 19 20
21 22 23 24 25
M.ACCESS
CONTINUE SHUFFLE PROGRAM
NAME CHAR
RM-DR1J
NUM
> 25
CD SYNC
STANDBY
CD SYNC
START
CD SYNC
STOP
CD PLAYER
/
1
Turn on the mixer (amplifier) and the CD player, and
select CD on the mixer (amplifier).
2
Do steps 3 to 6 of “Recording on an MD” on page
18.
3
Insert a CD into the CD player and select the
playback mode (Shuffle Play, Program Play, etc.) on
the CD player.
4
Press CD-SYNC STANDBY.
The CD player changes to play standby and the MD
recorder changes to recording standby.
5
Press CD-SYNC START.
The recorder starts recording and the CD player starts
playing.
The track number and elapsed recording time of the
track appear in the display.
If the CD player doesn’t start playing
Some CD players may not respond when you press
CD-CYNC START. Press
X on the CD player’s remote
instead to start playing on the CD player.
26
Recor
ding on MDs
Operations you may want to do during CD
Synchro-recording
To Press
Stop recording CD-SYNCHRO STOP
Pause recording CD-SYNCHRO STANDBY
Locate the next track to CD PLAYER . / >
be recorded during
recording pause
Resume recording
CD-SYNCHRO START
after pausing
Check the remaining
TIME of the recorder
recordable time on the MD
z You can use the remote of the CD player during CD Synchro-
recording
Press To change the And change the
recorder to CD player to
H Recording Play
x Recording pause Stop
X Recording pause Pause
z You can change CDs during CD Synchro-recording
1 Press x on the CD player’s remote.
2 Change the CD.
3 Press H on the CD player’s remote.
Recording resumes.
Notes
• When performing CD Synchro-recording with a CD
player with a mode selector, be sure to set the selector to
CD1.
• When you record tracks from certain CD or multi-disc
players, the entire material may be recorded as a single
track.