3
MDR-RF975R
SECTION 2
DISASSEMBLY
2-1. DRIVER (R SIDE), RX-BASE BOARD
•
The equipment can be removed using the following procedure .
Driver (R side), RX-BASE board
Driver (L side), Hanger (L)
Set
SW board, Harger (R)
Holder (L)
Holder (R)
Note:
Follow the disassembly procedure in the numerical order given .
Four
claws
RX-BASE board
SW board
SW board
(Housing (R) side)
Housing (R)
Solder the each leads directly to the position as shown
while being cautions of colors.
Set the each leads as illustrated below.
Precaution for installtion
Precaution for installtion
Precaution for installtion
Head band
assy (front)(natural)
Head band
assy (front)(red)
Head band
assy (rear)(green)
Head band
assy (rear)(natural)
Driver (red)
Driver (natural)
Red
Natural
From RX-BASE board.
From head
band assy (front).
From head
band assy (rear).
From
SW board.
Driver (R side)
ANT
qa
RX-BASE board
0
Remove the
eight solderings.
2
Four screws (M 2
×
5)
1
pad, ear
4
Holder (R),ear pad
3
Plate (R) assy, front
6
Driver
8
Charge terminal
9
Volume knob
5
Remove the
two solderings.
7
Remove the
two solderings.
Groove
Groove
