— 3 —
SECTION 2
DISASSEMBLY
2-2. RX BASE BOARD
Note :
Follow the disassembly procedure in the numerical order given.
•
The equipment can be removed using the following procedure.
Driver (R side) RX BASE board
Driver (L side) RX CHR board
Set
Lid (R), holder
Hanger (R)
RX SW board, Holder (R)
Lid (L), holder
Hanger (L)
Holder (L)
2-1. DRIVER (R SIDE)
Driver (R side)
Driver (R side)
From RX BASE board
2
Four screws
(+P2
×
6)
Solder the each lead wires
directly to the position as
shown while being
cautions of colors
Precaution for installation
1
Pad, ear
3
Plate (R) assy, front
4
Remove the two solderings
Natural
Red
from RX SW board (–) (natural)
Head band (rear) (natural)
Driver (natural)
Driver (red)
Head band (front) (green)
Head band (front) (natural)
Head band (front) (natural)
Head band (front) (black)
Head band (rear) (red)
from RX SW board (+) (black)
RX BASE board
RX BASE board
3
Button, sound selection
4
Knob, volume
1
Two screws (+P2
×
6)
2
Remove the ten solderings
Solder the each lead wires directly to the position as
shown while being cautions of colors
Precaution for installation
