Help Guide
MDR-HW700DS
Top
>
Connection
>
Connecting digital devices with HDMI jacks
>
Getting Started
Connection
Operation
Others
Troubleshooting
Specifications
Important information
Contents list
Connection example 5: Connecting playback devices to
the processor via an AV amplifier
See this connection example when you connect playback devices via an AV amplifier, not
directly to the processor. The connection method is the same as when you use a theater
rack or a sound bar with HDMI jacks instead of an AV amplifier.
Note
In the HDMI transmission system, the sender device transmits the signals in video/audio
formats to the receiver device, according to the video/audio formats supported and
indicated by the receiver device. This means that, in this type of connection, only the
audio formats supported by the AV amplifier are transmitted to the processor. Therefore,
the audio formats may be limited to fewer than those supported by the processor. Note
that you may not be able to enjoy the full advantage of the processor with this type of
connection.
1.
Set the CONTROL FOR HDMI switch to “MODE2.”
2.
Connect the DP-HW700 processor, an AV amplifier, a TV, a BD/DVD device and/or a
game device.
If the devices are connected to the TV, disconnect them from the TV, and connect
them to the processor.
35
