Sony MDR-1000X, Руководство по обслуживанию

Страница: 5 / 12

MDR-1000X
5
2-5. INPUT JACK (J1) (L-ch)
2-6. BUTTON ASSY, L KEY ASSY (KEY1) (L-ch)
‡ How to install the INPUT jack (J1)
– Jack rear view –
There is no gap between
L JACK board and INPUT
jack (J1). There is gap between
L JACK board and INPUT
jack (J1).
1
screw
(2
u
4)
4 INPUT jack (J1)
– L-ch –
hole
3
Remove the four solders.
2 Lift up the L JACK board in
the direction of the arrow.
lower side
INPUT jack (J1) INPUT jack (J1)
L JACK board L JACK board
OK
NG
1 button ambient assy
2 button NC assy
3 button power
assy
– L-ch –
Insert straight into the interior.
OK
Insert at a slant.
NG
‡ How to install the flexible flat cable
When installing the flexible flat cable, ensure that
the colored line is parallel to the connector after insertion.
colored line
flexible flat
cable
connector
colored line
flexible flat
cable
connector
boss
two bosses
4
L KEY FPC connector
(CN602)
lower side
The opposite side
is the terminal side.
hole
5 L KEY assy (KEY1)
Note: When installing the L KEY assy,
align the three bosses and three holes.
hole
hole
Ver. 1.1