Sony MD WALKMAN MZ-E33, Руководство по обслуживанию

Страница: 12 / 26

– 12 –
052
Adjustment value (lit)
052
Adjustment value (flashing)
052
Mode No.
Adjustment value (lit)
Adjustment in Servo Mode Method
1. When each adjustment mode is set according to the structure of
servo mode, the lower two digits of the mode No. and the ad-
justment value written in EEPROM are displayed and lit on the
LCD on the remote commander.
2. When the
P
key is pressed, the following display appears and
the automatic adjustment is performed.
Note)
Although the VOL +/– keys can be used to change the
adjustment value to any value, they should not be used
whenever possible.
3. When the automatic adjustment is completed, the flashing ad-
justment value is lit.
051 NG
NG mode No.
Error code
047 End-OK
057
Mode No. under adjustment
Adjustment value (flashing)
* Remote commander display during automatic adjustment
4. If result of automatic adjustment is OK, the following display
appears.
5. If result of automatic adjustment is NG, the following display
appears.
* If NG, enter servo mode to perform automatic adjustment of the
item determined as NG.