Sony MCC-1000MD, Инструкция по эксплуатации

Страница: 36 / 61

36
This unit is equipped with a fluorescein mode that
produces optimal image quality when shooting
subjects that are fluorescing with fluorescein.
To enable fluorescein mode, set [Fluorescein] to
[On] in the [Function] menu.
Note
The white balance cannot be adjusted during
fluorescein mode.
During fluorescein mode, the color can be
adjusted using a different method from normal
mode via [Color] in the [Picture] menu.
Adjusting the saturation for only the
fluorescing color
Adjust the saturation for only the color
fluorescing due to the excitation light with
[Color] > [Saturation] in the [Picture] menu.
Adjusting the hue for only the fluorescing
color
Adjust the hue for only the color fluorescing due
to the excitation light with [Color] > [Hue] in the
[Picture] menu.
You can customize settings to match shooting
conditions and save these as a picture profile to
load when necessary.
Simply select the picture profile to shoot at your
preferred image quality settings.
You can save up to six different picture profiles
on this unit (No. 1 to No. 6). There are six factory
presets stored as defaults.
To register a picture profile, use the [Picture]
menu’s [Profile] option. To activate a picture
profile, press the PROFILE button.
You can easily switch to registered settings just
by activating the picture profile.
When you activate a picture profile, the activated
picture profile number will be displayed on the
video monitor for 3 seconds.
Fluorescein Mode Picture Profile
Registering/activating picture
profiles
PROFILE button