Sony Mavica MVC-FD85, Руководство по обслуживанию

Страница: 80 / 112

5-26
20. CCD Black Defect Compensation
Mode STILL
Subject Clear chart
(25 cm from the front of the lens)
(Note 1)
Adjustment Page 7
Adjustment Address 60 to 87
Note 1: Check that there are no dust, no dirt and no reflection on the clear
chart.
Note 2: Any subject other than the clear chart should not be in the screen.
Adjusting method:
1)
Select page: 0, address: 01, and set data: 01.
2) Select page: F, address: DF, after noting down the data, set
data: 4C, and press the PAUSE button.
3) Select page: 6, address: 2C, and set data: 01.
4) Select page: 6, address: 90, and set data: 00.
5) Select page: 6, address: 91, and set data: 03.
6) Select page: 6, address: 92, and set data: 00.
7) Select page: 6, address: 93, and set data: 00.
8) Select page: 6, address: 6C, and set data: 01.
9) Select page: 6, address: 01, set data: 79, and press the PAUSE
button.
10) Select page: 6, address: 30, set data: 01, and press the PAUSE
button and wait for 4 seconds.
11) Select page: 6, address: 01, set data: 8D, and press the PAUSE
button.
(The CCD black defect compensation is performed and the
adjustment data is stored in page: 7, address: 60 to 87.)
12) Select page: 6, address: 02, and check that the data changes to
“01”.
13) Select page: 6, address: 55, and check the data.
00 to 0A : Normal
0B to FF : Defective
14) Select page: 6, address: 01, set data: 00, and press the PAUSE
button.
15) Select page: F, address: DF, set data: 5A, and press the PAUSE
button.
16) Select page: 6, address: 01, set data: 89, and press the PAUSE
button. (Black defect check)
17) Select page: 6, address: 02, and check that the data changes to
“01”.
18) Select page: 6, address: 55, and check the data.
00 : Normal
01 to FF : Defective
Processing after Completing Adjustments:
1)
Select page: F, address: DF, set the data noted down at step 2),
and press the PAUSE button.
2) Select page: 6, address: 01, and set data: 00, and press the
PAUSE button.
3) Select page: 6, address: 2C, and set data: 00.
4) Select page: 6, address: 30, and set data: 00.
5) Select page: 6, address: 91, and set data: 00.
6) Select page: 6, address: 6C, and set data: 00.
7) Select page: 0, address: 01, and set data: 00.
21. CCD White Defect Compensation
Mode STILL
Subject Clear chart
(25 cm from the front of the lens)
(Note 1)
Adjustment Page 7
Adjustment Address 88 to AF
Note 1: Check that there are no dust, no dirt and no reflection on the clear
chart.
Note 2: Any subject other than the clear chart should not be in the screen.
Adjusting method:
1)
Select page: 0, address: 01, and set data: 01.
2) Select page: F, address: DE, after noting down the data, set
data: 1E, and press the PAUSE button.
3) Select page: F, address: E3, after noting down the data, set data:
08, and press the PAUSE button.
4) Select page: 6, address: 01, set data: 8B, and press the PAUSE
button.
(The CCD white defect compensation is performed and the
adjustment data is stored in page: 7, address: 88 to AF.)
5) Select page: 6, address: 02, and check that the data changes to
“01”.
6) Select page: 6, address: 55, and check the data.
00 to 7F : Normal
80 to FF : Defective
7) Select page: 6, address: 01, set data: 00, and press the PAUSE
button.
8) Select page: F, address: DE, set data: 0F, and press the PAUSE
button.
9) Select page: F, address: E3, set data: A0, and press the PAUSE
button.
10) Select page: 6, address: 01, set data: 87, and press the PAUSE
button. (White defect check)
11) Select page: 6, address: 02, and check that the data changes to
“01”.
12) Select page: 6, address: 55, and check the data.
00 : Normal
01 to FF : Defective
Processing after Completing Adjustments:
1)
Select page: F, address: DE, set the data noted down at step 2),
and press the PAUSE button.
2) Select page: F, address: E3, set the data noted down at step 3),
and press the PAUSE button.
3) Select page: 6, address: 01, and set data: 00, and press the
PAUSE button.
4) Select page: 0, address: 01, and set data: 00.