Sony Mavica MVC-FD81, Руководство по обслуживанию

Страница: 49 / 92

5-1
MVC-FD81
SECTION 5
ADJUSTMENTS
5-1. CAMERA SECTION ADJUSTMENT
1-1. PREPARATIONS BEFORE ADJUSTMENT (CAMERA SECTION)
1-1-1. List of Service Tools
• Oscilloscope • Regulated power supply • Digital voltmeter
• Frequency counter • AC power adapter
J-1 J-2
J-6
J-3
J-7 J-8
J-4 J-5
Fig. 5-1-1.
J-9 J-10
J-11 J-12
Ref. No.
J-1
J-2
J-3
J-4
J-5
J-6
J-7
J-8
J-9
J-10
J-11
J-12
J-13
J-14
Name
Filter for color temperature correction (C14)
ND filter 1.0
ND filter 0.3
Pattern box PTB-450
Color chart for pattern box
Siemens star chart
Adjustment remote commander (RM-95 upgraded).
(Note 2)
Clear chart for pattern box
CPC-9 jig (12P/18P, 0.5mm)
Extension cable (10P, 0.8mm and 18P, 0.5mm)
Extension cable (50P, 0.5mm)
Alignment disk TFD2-1(+)
(Two disks as pair) TFD2-2(–)
Cleaning disk (OR-D29WA)
Cleaning disk
Personal computer with Windows95/98 installed
Power code
Parts Code
J-6080-058-A
J-6080-808-A
J-6080-818-A
J-6082-200-A
J-6020-250-A
J-6080-875-A
J-6082-053-B
J-6080-621-A
J-6082-393-B
J-6082-427-A
J-6082-434-A
8-967-990-01
8-967-990-11
8-960-009-39
Available on market
J-6082-223-A
Usage
Auto white balance adjustment/check
White balance adjustment/check
White balance check
White balance check
For checking the flange back
For connecting the adjustment remote commander and
the measuring instruments
For extension between the FDD UNIT and PK-44 board
(CN601, 602)
For extension between the DD-119 board (CN302) and
the FC-67 board (CN603)
For FDD dynamic inspection and LCD system
adjustments
For FDD head cleaning (Note 1)
For checking the recorded picture
For the battery end adjustment
Note 1: Usage and operating note
One or two seconds of momentary use of cleaning disk is sufficient
such that FD is accessed momentarily by system control when
main power is turn on. After cleaning, insert a FD for playback.
When cleaning is insufficient, use a cleaning disk again.
Caution: Avoid using a cleaning disk excessively. Head can be
broken. Note 2: If the micro processor IC in the adjustment remote commander is
not the new micro processor (UPD7503G-C56-12), The pages
cannot be switched. In this case, replace with the new micro
processor (8-759-148-35).
J-13 J-14