5-6
HVL-MT24AM
5-3.
CHARGING VOLTAGE ADJUSTMENT
Note:
If dialog box of error code appears during the adjustment, check the reason of error referring to page 5-12.
Equipment
• Personal Computer (PC)
• Camera DSLR-A100
• USB Cord With Connector
• Flash Adjustment Program
Note:
Flash Adjustment Program is downloadable from the ESI homepage.
• DC Power Supply
• Digital Multimeter
• Power Supply Adaptor
1. Preparations
1)
Set the equipments as shown in the Fig. 5-3-1.
Note:
For connection method of power supply adaptor, refer to page 5-2.
Set the detection pin of the digital multimeter to the DC voltage detecting point.
(The probe (-) of the digital multimeter can be connected to the negative line of the DC power supply.)
Fig. 5-3-1
2)
Set the voltage and current of the DC power supply to “5.8V, 1.8A”.
3)
Start the flash adjustment program “FlashAdjustment.exe” referring to “5-1-3. Flash Adjustment Program”.
Fig. 5-3-2
Personal Computer
Digital multimeter
Power supply adaptor
USB cord with connector
DC power supply
(5.8 V, 1.8 A)
The probe (–) of the digital multimeter can be connected
to the negative line of the DC power supply.
Camera
