Sony LUMA LMD-1410, Руководство по эксплуатации

Страница: 13 / 31

Location and Function of Parts and Controls
13
a
Tally lamp (LMD-1420/2020)
You can check the status of the monitor by the color of
the tally lamp.
The tally lamp lights in red, green or amber according to
the input signals.
b
POWER switch and indicator
Press to turn on the power. The indicator turns on. Press
again to turn off the power.
c
KEY INHIBIT indicator
When the key inhibit function works, the indicator
lights.
For the key inhibit function, refer to “KEY INHIBIT
menu” on page 25.
d
VOLUME buttons
Press the + button to increase the volume or the – button
to decrease it.
e
Menu operation buttons
Displays or sets the on-screen menu.
M/m/</, (arrow) buttons
Select the menu or make various adjustments.
MENU button
Press to display the on-screen menu.
Press again to clear the menu.
RESET button
Resets the value of an item back to the previous
value. This button functions when the menu item is
adjusted (displayed) on the screen.
ENTER button
Press to confirm a selected item on the menu.
f
ASPECT select button
Sets the aspect ratio of the picture, 4:3 or 16:9.
g
SCAN select button
You can change the scan size of the picture. When you
press the button, the scan size is changed to normal (5%
over scan), under (-3% under scan) or ZOOM (LMD-
1420/2020 only) set on the menu (see page 25).
h
BLUE ONLY button
Press this button to eliminate the red and green signals.
Only blue signal is displayed as an apparent
monochrome picture on the screen. This facilitates
“chroma” and “phase” adjustments and observation of
VCR noise.
i
EXT SYNC (external sync) button
Press to operate the unit on an external sync signal
through the EXT SYNC IN connector.
The EXT SYNC button works when the component/
RGB signals are input.
j
SDI button
Press to monitor the signal from the OPTION IN
connector.
k
RGB/COMPONENT button
Press to monitor the signal through the RGB/
COMPONENT input connectors.
l
LINE B button
Press to monitor the signal through the LINE B input
connectors.
m
LINE A button
Press to monitor the signal through the LINE A input
connectors.
n
Speakers
The audio signal which is selected by the input select
button on the front panel is output.